Table of Contents
Advertisement
Connecting the PC as a monitor
Position Adjustment
This function is to adjust picture to left/right and up/down
as you prefer.
1. Press the MENU button.
2. Select the H/V Position menu.
3. Press the PRxy button to select the desired
position item.
4. Press the Ïq button to adjust horizontal
position and vertical position.
5. Press the TV/AV button to exit menu
Auto
This function is for the automatic adjustment of the screen position, clock and
clock phase. The displayed image will disappear for a few seconds while the
Auto-configuration is in process.
Note: Some signal from some graphics boards may not function properly.
If the results are unsatisfactory, adjust your monitor's position, clock and clock
phase manually.
Reset
This function allows you to return to the good picture reproduction programmed
at the factory and cannot be changed.
28
H/V Position
H-Position
50
V-Position
50
Position :▲▼
Adjust : ◀▶
Back : MENU
Exit : TV/AV
Advertisement
Table of Contents
