Upper Rack - Hotpoint LFFA+ 8M14 Operating Instructions Manual

Hide thumbs Also See for LFFA+ 8M14:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Wash options*
EN
The OPTIONS may only be set, modified or reset after the
wash cycle has been selected and before the Start/Pause
button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible with the
selected wash cycle (see Table of wash cycles) , the correspond-
ing LED flashes rapidly 3 times and 2 short beeps will sound.
If an option is selected which is incompatible with another (previ-
ously selected) option, the indicator light corresponding to the
option selected first will flash 3 times, 3 beeps will sound and it
will be deselected, while the most recently selected option will
remain active.
To deselect an option which has been set by mistake, press the
corresponding button again.
Half load using the upper rack
If there are not many dishes to be washed, a half load cycle
may be used in order to save water, electricity and detergent.
Select the wash cycle and press the HALF LOAD button: the
indicator light will illuminate and the wash cycle will take place
only in the upper rack.
Remember to load the upper rack only, and to reduce
the amount of detergent accordingly.
It is better to use powder detergent in this case.
This option is not compatible with the following wash
cycles: Speed and Baby.
Delayed start
It is possible to delay the start time of the cycle for a period of
time between 1 and 24 hours.
1. After selecting the desired wash cycle and any other options,
press the DELAYED START button: the corresponding indicator
light will illuminate. Use the same button to select the time at
which you wish the wash cycle to begin (after a period of 1 to
24 hours).
2. Confirm your selection using the Start/Pause button; the
countdown will begin. The selected delay period indicator light
flashes and the Start/Pause button stops flashing (the light
becomes fixed instead).
3. When the set time has elapsed, a long beep sounds, the
DELAYED START indicator light switches off and the wash
cycle begins.
To deselect the DELAYED START option, press the DELAYED
START button repeatedly until the text OFF appears.
The Delayed Start function cannot be set once the wash
has been started.
8
Extra drying
To improve the dryness level of the crockery, press the EXTRA
DRYING button; the indicator light will illuminate. If it is pressed
again the option will be deselected.
The EXTRA DRYING option increases the duration of the
wash cycle.
Multi-functional tablets (Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button. The corresponding indicator
light will illuminate. The "Multi-functional tablets" option results
in the lengthening of the wash cycle.
The MULTI-FUNCTIONAL TABLETS option remains
set for subsequent wash cycles if it is not deselected.
The use of tablets is only recommended for models
which offer the MULTI-FUNCTIONAL TABLETS option.
This option is not recommended for use with wash
cycles which do not specify the use of multi-functional
tablets.
A
Table of options
Delayed
Start
Eco
Yes
Normal
Yes
Daily A 60
Yes
Soak
Yes
Intensive
Yes
Speed 25'
Yes
Crystal
Yes
Baby wash
Yes
*
Only available in selected models.
B
C
D
Half
Tabs
Extra Dry
Load
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
No
No
No

Advertisement

Table of Contents
loading

Table of Contents