Table of Contents
Advertisement
Quick Links
LSFF 8M126
GB
English
Operating instructions
DISHWASHER - Contents
Operating instructions,1
Product Data, 3
Installation, 4-5
Loading the racks, 8-9
Wash cycles, 11
Troubleshooting, 14
Advertisement
Table of Contents
Related Manuals for Hotpoint LSFF 8M126
Summary of Contents for Hotpoint LSFF 8M126
-
Page 1: Table Of Contents
LSFF 8M126 English Operating instructions DISHWASHER - Contents Operating instructions,1 Precautions and advice, 2-3 Product Data, 3 Installation, 4-5 Description of the appliance, 6 Refined salt and rinse aid, 7 Loading the racks, 8-9 Detergent and dishwasher use, 10 Wash cycles, 11... -
Page 2: Precautions And Advice
Precautions and advice • The water supply tap must be shut off and the plug should be removed from This appliance was designed and the electrical socket at the end of every manufactured in compliance with international cycle and before cleaning the appliance safety standards. -
Page 3: Product Data
(see Special wash cycles and options, if available). Product Data (product fiche) Product Fiche HOTPOINT Brand LSFF 8M126 Model Rated capacity in standard place settings (1) Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) Energy consumption per year in kWh (2) 0.74... -
Page 4: Installation
Installation If the appliance must be moved at any time, keep it in an suit Tap connections*: A range of adaptors are available to upright position; if absolutely necessary, it may be tilted onto its your tap. back. Connecting the drain hose Positioning and levelling Connect the drain hose (without bending) to a drain duct with a 1. - Page 5 See appliance data plate This dishwasher conforms to the Changing the Mains Lead following European Community A lead can be ordered from Hotpoint Service: Directives: -2006/95/EC (Low Voltage) - If you have damaged the existing lead or require a longer one -2004/108/EC (Electromagnetic a charge will be made.
-
Page 6: Description Of The Appliance
Description of the appliance Overall view Upper rack Upper spray arm Tip-up compartments Rack height adjuster Lower rack Lower spray arm Cutlery basket Washing filter Salt dispenser Detergent and rinse aid dispensers Data plate Control Panel Control panel Select Wash Cycle button Start/Pause button ON/OFF/RESET... -
Page 7: Refined Salt And Rinse Aid
Refined Salt and Rinse Aid Average autonomy Only use products which have been specifically designed Water Hardness Table salt dispenser with 1 for dishwashers. Do not use table salt or industrial salt. wash cycle per day Follow the instructions given on the packaging. level °dH °fH... -
Page 8: Loading The Racks
Loading the racks Tips Cutlery basket Before loading the racks, remove all food residues from the The basket is equipped with top grilles for improved cutlery ar- crockery and empty liquids from glasses and containers. No rangement. The cutlery basket should be positioned only at the preventive rinsing is needed under running water. - Page 9 Adjusting the height of the upper rack Tray The height of the upper rack can be adjusted: high position Some dishwasher models are fitted with a sliding tray which to place bulky crockery in the lower rack and low position to can be used to hold small crockery and cutlery.
-
Page 10: Detergent And Dishwasher Use
Detergent and dishwasher use Measuring out the detergent Starting the dishwasher 1. Turn the water tap on. Good washing results also depend on the correct amount of 2. Press the ON/OFF button. detergent being used. Exceeding the stated amount does not 3. -
Page 11: Wash Cycles
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycle Approximate Water... -
Page 12: Special Wash Cycles And Options
Special wash cycles and Options Half Load Option using the upper or lower rack Notes: Optimum performance levels when using the “Express” cycle If there are not many dishes to be washed, a half can be achieved by respecting the specified number of place load cycle may be used in order to save water, electricity and settings. -
Page 13: Care And Maintenance
Care and maintenance Cleaning the filters The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They must be cleaned if you wish to achieve the best results in every wash. Clean the filters regularly. -
Page 14: Troubleshooting
Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start • The water supply tap is not turned on. • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately or cannot be controlled. -
Page 15: Product Guarantee And Repair Information,15
Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use 12 Months Parts and Labour Guarantee quality, recycled components to keep down customer Your appliance has the benefit of our manufacturer’s costs and minimise material wastage. - Page 16 195154895.00 - NC 03/2017 jk - Xerox Fabriano www.hotpoint.co.uk...