Assembling And Adjustments; How To Tension The Chain - Husqvarna K970 II Chain Operator's Manual

How to tension the chain

• If the play between drive link and bar is bigger than 12
mm, the chain is too loose and must be tightened.
• Opening the adjust screw cover.
• Pull the handle backwards.
• Continue to move the handle down-wards until you
start to tension the chain.

ASSEMBLING AND ADJUSTMENTS

>12 mm
• Hold the bar upwards as you move the handle
forward.
• Lock the chain tension by tightening the counter
screw.
• Close the adjust screw cover.
A correctly tightened chain should be easy to pull around
by hand.
–
English 9