Cembre B70M-P24 Operation And Maintenance Manual page 5

26
26-2
27
13
5
28
38
580
46
61
37
17
20
19
*
16
18
8
48
15
9
31
33
30
29
32
31
Serial number
Numéro de série
Seriennummer
38
Número de serie
560
Numero di matricola
39
519
43
14-7
14
25
24
22
23
200
17
6
21
7
Torque setting
* Nm Lbf ft
16 50 37
44 30 22
43
2. UNIT DESCRIPTION (Ref. to Fig. 9)
01
hydraulic pump
58
02
oil filler cap ( 6800076)
code
03
anchor ring for shoulder strap (
59
04
integral handle
05
mechanical pressure release button (
56-1
06
battery residual power display
07
socKet for connecting the remote hand controller
40
08
socKet for connecting to external 24 v dc supply
09
quicK release female automatic hydraulic coupler (
2
09
quicK release female automatic hydraulic coupler
41
for use with insulated pump only (
*
10
remote hand controller
56-1
-
11
n i
mh rechargeable battery (
56
-
12
self ventilating battery charger
(
13 ft)
66
3 metre 9.8
high pressure flexible hose with quicK release
male / female automatic hydraulic couplings
59
11
14
shoulder strap ( 6000354)
code
15
10
canvas bag for storing accessories (
*
16
remote pneumatic hand controller
44
3. INSTRUCTION FOR USE
The pump is supplied with the battery completely discharged; before use, fully charge the
49
battery using the charger supplied (see § 3.5).
50
In order to extract the battery from its housing we recommend you lay the pump on its
back (see Fig. 2): press the release button downwards (1) remove the battery (2); to insert
64
it, simply slide it in along the guides until it locks.
65
4
3.1) Setting up
– Carry the pump using the integral handle (04) or the shoulder strap (14) attached to the
rings (03) (see Fig. 9).
– Position the pump on a flat surface. There are two
35
- vertical , resting on its base.
- horizontal
, resting on its back where moulded ribs improve firmness and stability
(see Fig. 3).
Should it be necessary however, the pump's hermetically sealed hydraulic circuit allows
63
it to operate in any position.
62
– Remove "REMOTE CONTROLLER" protective cap, connect the remote hand controller
to the socket (07) (see Fig. 4): tighten the plug (90) by turning the bezel clockwise until it
locks.
– Check the high pressure hose (13), if abrasions are evident, or if the hose is kinked or
damaged, do not use; connect the hose to the hydraulic head, and to the corresponding
female coupler (09) on the pump (see Fig. 5).
4
57
6040427)
code
6000476)
code
56
3
*
54
6060122)
code
,
55
6060130)
code
( 2596112)
code
2596105)
code
,
220 - 240 V / 50-60 Hz ( 2596100)
code 51
42
*
58
2593309)
code
,
for use with insulated pump only (
60
12
stable work
positions recommended:
53
ENGLISH
2596113)
code