Usb Interface - Datalogic TC1200 Reference Manual

2
RS232 Interface
The TC1200-0000 Scan Engine can communicate with the Host using the RS232 signals
provided on the J1 connector. The pins are indicated in Table 1 and in the following diagram:
It is always advisable to use shielded cables. The overall maximum cable length must be
less than 15 m (49.2 ft).

USB Interface

The TC1200-0100 Scan Engine can communicate with the Host using the USB signals
provided on the J1 connector. The pins are indicated in Table 1 and in the following diagram:
It is always advisable to use shielded cables. The overall maximum cable length must be
less than 15 m (49.2 ft).
10
TC1200 J1
5
TX
7
RX
10
GND
Figure 12 - RS232 Interface Connection to Host
TC1200 J1
1
D-
2
D+
9
VCC
10
GND
Figure 13 - USB Interface Connection to Host
TC1200 REFERENCE MANUAL
Host
RXD
TXD
GND
Earth
Ground
Host
D-
D+
VCC
GND
Earth
Ground