Power Supply; Mains Operation; Inserting The Back-Up Battery - Grundig Sonoclock 395 Q User Manual

Table of Contents

Advertisement

POWER SUPPLY

Mains operation

Check that the mains voltage on the type
plate (on the rear side of the device) cor-
responds to your local mains supply. If
this is not the case, contact your specia-
list dealer.
1
Plug the mains cable into the socket
(230V ~ , 50/60 Hz).
Caution:

T he device is connected to the
7
mains with the power plug. To ful-
ly disconnect the device from the
mains, pull out the plug.

T he mains plug is used to discon-
7
nect the device. It shall remain rea-
dily operable and should not be
obstructed during intended use.
________________________________

Inserting the back-up battery

During mains operation, the back-up
battery ensures that clock settings are
not lost in the case of a power failure or
when the device is briefly disconnected
from the mains.
1
Open the battery compartment lid by
pressing on the arrow and pushing
down the lid.
2
When inserting the battery (9 V, 6LF
22), observe the polarity marked on
the base of the battery compartment.
3
Close the battery compartment.
Note:

7
Environmental note:

7
R emove the back-up battery when
it is flat or when you know that the
device will not be used for a long
period of time.
B atteries, including those which do
not contain heavy metal, should
not be disposed of with household
waste. Always dispose of used
batteries in accordance with local
environmental regulations.
ENGLISH 17

Advertisement

Table of Contents
loading

Table of Contents