Mebus 10373 Owner's Manual page 16

To obtain an accurate weather forecast & barometric pressure reading, you need to input
your current altitude. After the reset of the unit, it will enter the altitude setting mode.
Press " " or " " to set the unit first, and then press "PRESSURE" and enter your current
altitude. Press "PRESSURE" to confirm and exit the setting. You can also hold "PRESSURE"
button to enter altitude setting mode during normal use.
Press PRESSURE button to select pressure unit between hPa, inHg & mb.
WEATHER FORECAST SOUND EFFECTS
The unit has 5 built-in weather forecast nature sound effects, each corresponds to one
of the weather forecast conditions and can broadcast continuously or every 30 to 60
minutes.
Weather Forecast
Sunny:
Partial Sunny:
Cloudy:
Rainy:
Stormy:
Select broadcasting modes with the slide switch located on the back casing
OFF : Completely off
ON : Broadcast nature sound continuously **
30 minutes : Broadcast nature sound every 30 minutes **
60 minutes : Broadcast nature sound every 60 minutes **
** Only available when adapter is connected
For 30 & 60 minutes broadcasting mode, you can select the duration (10, 30, 60 or 120
seconds) of each broadcast using the lower slide switch on the back.
To listen directly to the current weather forecast sound effect, press "SNOOZE/LIGHT/
SOUND" button
Use the VOLUME slide switch on the side to adjust volume level
IN/OUT TEMPERATURE & HUMIDITY
Temperature reading is located on the lower left of the display and humidity is on the
lower right.
Press "C/F" button to select temperature unit C/ F.
Press CHANNEL/SEARCH button to select indoor, Ch1, Ch2, Ch3 and auto-channel
scrolling display modes.
W160 Mebus_IM.indd 16
Nature Sound Effects
Bird #1
Bird #2 (Bird singing is less frequent than Bird #1)
Windy
Rainy
Thundering
16
9/30/06 10:47:52 AM