Rear Wheels - Kubota M8540 Operator's Manual

54 TIRES, WHEELS AND BALLAST
BRear Wheels
Rear tread width can be adjusted as shown with the
standard equipped tires.
To change the tread width
1. Remove the wheel rim and / or disk mounting bolts.
2. Change the position of the rim and / or disk (right and
left) to the desired position, and tighten the bolts.
A Always attach wheels as shown in the drawing.
A If not attached as illustrated, transmission parts may
be damaged.
A When re-fitting or adjusting a wheel, tighten the bolts
to the following torques then recheck after driving the
tractor 200m (200 yards) and thereafter according to
service interval.
(See "MAINTENANCE" section.)
(1)
Steel disk
343 to 401 244
(35.0 to 41.0) (24.9)
[254 to 297] [180]
N-m (kgf-m) [ft-lbs]
(2)
Cast iron disk
260 to 304
(26.5 to 31.0)
[192 to 224]