Checking Intake Air Line; Checking Power Steering Line; Adjusting Toe-In - Kubota M8540 Operator's Manual

76 PERIODIC SERVICE
BChecking Intake Air Line
1. Check to see that hoses and hose clamps are tight and
not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) Hose
(2) Hose clamps
BChecking Power Steering Line
1. Check to see that all lines and hose clamps are tight
and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) Power steering pressure hoses
BAdjusting Toe-in
4WD 2 to 8 mm (0.08 to 0.31 in.)
2WD 1 to 5 mm (0.04 to 0.2 in.)
1. Park tractor on a flat place.
2. Turn steering wheel so front wheels are in the straight
ahead position.
3. Lower the implement, lock the park brake and stop the
engine.
4. Measure distance between tire beads at front of tire, at
hub height.
5. Measure distance between tire beads at rear of tire, at
hub height.
6. Front distance should be shorter than rear distance.
If not, adjust tie rod length.
(A) Wheel - to - wheel distance at rear
(B) Wheel - to - wheel distance at front
(C) "FRONT"
Proper toe-in