NEC MULTISYNC P1150 User Manual page 22

OSM Menus
Tools 1
Provides a list of optional adjustments which include the following:
LANGUAGE: OSM menus are available in 6 languages.
OSM POSITION: You can choose where you would like the OSM
image to appear on your screen. Selecting OSM location allows you to
manually adjust the OSM menu left, right, up, or down.
OSM TURN OFF: The OSM menu will stay on as long as it is in use.
In the OSM Turn Off sub-menu, you can select how long the monitor
waits after the last touch of a button to shut off the OSM menu. The
preset choices are 10, 20, 30, 60, 120 seconds.
OSM LOCK OUT: This control completely locks out access to all
OSM functions. When attempting to activate OSM while in the lockout
mode, a screen will appear indicating that OSM is locked out. To
activate the OSM Lockout function, press PROCEED, then " " and
hold down simultanously. To de-activate the OSM Lockout, press
PROCEED, then " " and hold down simultanously.
IPM OFF MODE: Using this function the OFF MODE of the IPM can
be disabled.
–
ENABLE: The IPM works normally, all four stages of the
energy saving are used.
–
DISABLE: The OFF MODE of the IPM is not used.
For standard computers and graphics boards you should keep the factory
setting ENABLE.
FACTORY PRESET: Selecting Factory Preset allows you to reset all
OSM settings back to the factory settings. A warning statement will
appear to confirm that you do want to reset ALL settings. Individual
settings can be reset by highlighting the control to be reset and pressing
the RESET button.
E - 17