E - 6
Recommended use
For optimum performance when setting up and using the MultiSync
P1150 colour monitor, please note the following:
–
The optimum monitor position is away from direct sunlight.
–
Place the monitor just below eye level for the ideal viewing
angle.
–
Allow adequate ventilation around the monitor so that heat can
properly dissipate.
–
Do not place any heavy objects on the power cord. Damage of
the cable may cause shock or fire.
–
Keep the monitor away from high capacity transformers,
electric motors and other devices which may create strong
magnetic fields.
–
Use the monitor in a clean, dry area.
–
Handle with care when transporting.
–
We recommend to adjust the brightness in a way that the
background raster disappears.
–
For ergonomical reasons we recommend not to use the
position of the maximum contrast control.
–
For ergonomical reasons the preset size and position is
recommended with the standard signals.
–
For ergonomical reasons preset colour setting and preset
side-pincushion setting is recommended.
–
For
ergonomical
non-interlaced signals with a vertical refresh rate between
75 and 160 Hz.
–
For ergonomical reasons we recommend not to use the primary
colour blue on dark background ( it is difficult to recognise and
produces eye fatigue due to insufficient contrast).
reasons
we
Recommended use
recommend
using