NEC MULTISYNC P1150 User Manual page 12

Recommended use
–
To separate the equipment from the power source you have
to remove the plug from the inlet socket.
–
The power outlet socket should be installed as near to the
equipment as possible, and should be easily accessible.
–
We recommend using the power cord supplied with the
monitor. However, if another type of power cord is
required, power cord H05VV-F should be used except in
U.K.
–
To clean the CRT surface use a lint-free, non-abrasive cloth
and a neutral cleaner based, non-abrasive cleaning solution
or glass cleaner for best results.
E - 7