Table of Contents
Advertisement
For disassembly, removal. cleaning, inspection and ad
-
justments,
refer to the GP338F/GP433F Service Man-
ual.
Particular attension should be paid to the position
of pump control gear and pump delivery pipe when in
-
stalling
.
Note:
1) Align the mark 6 on the oil pump control gear with
the guide pin
,
and set the oil pump control gear.
(Fig. 2-45)
2) As illustrated,
install
the oil pump delivery pipe.
Never attempt to change the pipe length by cutting
or use a longer pipe for installation.
(Fig. 2-46)
ENGINE -
Oil Pump
2
1.
Guide pin
2.
6Mark
Fig. 2-45
2
Delivery
pipe left 276-13161-00 (L=160
mm.).to
the
right
side
of carburetor.
2
.
Delivery
pipe
left
395·13161·00 (L=80
mm.) to
the left side of
carburetor
Fig. 2-46
3) The oil pump control rod adjustment should be made
with the throttle fully opened.
As illustrated, using two nuts, align the mark on the
oil pump case cover with the hole in the control le-
ver end.
(Fig. 2-47)
Fig. 2-47
-25-
Advertisement
Table of Contents
