Yamaha GP 338F Servise Manual page 34

Secondary sheave tightening torque {left)
21.70 - 32 .55 ft-Ibs. (3.0 - 4.5 m- kgs.)
Secondary spring color code
GPX338F
GPX433F
Fig. 3-6
Fig. 3-7
Yel low
Not painted
(2) Install the bushing, spring seat. V-belt. compression
spring , and primary sliding sheave complete on the
primary fixed sheave. Compress the compression
spring using primary sheave installer/remover 2 and
install primary sheave installer/ remover 1. (Figs. 3-
8,3-9)
Fig. 3-8
POWE R TRAI N -
Secondary Sheave
Fig. 3-9
(3) Remove primary sheave installer/remover 1 and 2
and install the cam, primary sheave cap complete
and lock washer. Tighten the bolt using the 22-mm.
open-end wrench (or off-set wrench) .
Tightening torque:
First tighten to 43.4 ft-Ibs. (6.0 m-kgs.)
Then loosen and retighten to 32.5 ft-Ibs. (4.5 m-kgs.)
- 31-