Quick Start - NEC MultiSync LCD225WNXM User Manual

Contents
Your new NEC MultiSync LCD monitor box* should contain the following:
• MultiSync LCD monitor with tilt base
• Audio Cable
• Power Cord
• Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male)
• Video Signal Cable (DVI-D to DVI-D) (LCD225WNX only)
• USB Cable (LCD205WNXM/LCD225WNXM only)
• User's Manual
• Cable Management Cover
• CD-ROM
User's Manual Audio Cable
* Remember to save your original box and packing material to transport or ship the monitor.
*2 Type of power cord included will depend on the where the LCD monitor is to be shipped.

Quick Start

To attach the MultiSync LCD monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2. For the PC or MAC with DVI digital output: Connect the DVI-D signal cable (not included for the U.S. and China) to the
connector of the display card in your system (Figure A.1). Tighten all screws.
For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your
system (Figure A.2). Tighten all screws.
For the MAC: Connect the MultiSync Macintosh cable adapter (not included) to the computer. Attach the 15-pin mini
D-SUB signal cable to the MultiSync Macintosh cable adapter (Figure A.3). Tighten all screws.
NOTE: Some Macintosh systems do not require a Macintosh cable adapter.
Figure A.1
Cable Management
CD-ROM
Cover
15-pin mini D-SUB
male to 15-pin mini (LCD225WNX only)
D-SUB male
Figure A.2
Power Cord*
DVI-D to DVI-D USB Cable
(LCD205WNXM/
LCD225WNXM only)
Macintosh
Cable Adapter
(not included)
English-3
2
MultiSync LCD monitor
Figure A.3