Appendix - NEC MultiSync LCD2080UX+ User Manual

Appendix

If you need detailed information about the controls, please use the advanced menu.
<How to use the advanced menu>
• Turn off your monitor.
• Turn on your monitor by pushing the "POWER" and "SELECT" button at the same time for at least one second
simultaneously.
• You will see the Advanced menu.
This menu is larger than the normal OSM.
<How to exit the advanced menu>
• Turn off and restart your monitor in the normal way.
To make an adjustment, ensure that the tag is highlighted, then press "SELECT".
To move to another tag, press "EXIT", then press "
Tag1 Brightness
Contrast
Auto Contrast
(Analog input only)
Auto Brightness
Tag2 R-H.position
(Analog input only)
G-H.position
(Analog input only)
B-H.position
(Analog input only)
R-SHARPNESS
(Analog input only)
G-SHARPNESS
(Analog input only)
B-SHARPNESS
(Analog input only)
Tag3 Signal
(Analog input only)
SIGNAL
setting
OFF
SIMPLE
FULL
O: automatical adjustment is performed about the items filled *.
X: automatical adjustment is not performed.
Notice: Automatical adjustment dose not work at less than 800x600 resolution.
Auto SW
(Analog input only)
Determines the automatic adjustment level as shown in the below table.
Size, Fine, Position
SIMPLE
FULL
DETAIL
*1: Black level, RGB sharpness, RGB delay and RGB position are adjusted using "Long cable software" which is included in the attached CD-ROM.
" or "
Adjusts the overall image and screen background brightness. Press "+" or "-" to adjust.
Adjusts the image brightness and contrast in relation to the background. Press "+" or "-" to
adjust.
Adjusts the image displayed for non-standard video inputs. Press "SELECT" to adjust.
Any adjustment requires the image to have white portions.
This function adjusts the brightness automaticaly for the best CONTRAST and
BRIGHTNESS setting based on the white display area.
Adjusts the position of the red component of the image. Press "+" or "-" to adjust.
Adjusts the position of the green component of the image. Press "+" or "-" to adjust.
Adjusts the position of the blue component of the image. Press "+" or "-" to adjust.
Adjusts the sharpness of the red component of the image. Press "+" or "-" to adjust.
Adjusts the sharpness of the green component of the image. Press "+" or "-" to adjust.
Adjusts the sharpness of the blue component of the image. Press "+" or "-" to adjust.
Determines when the auto adjustment is activated automatically.
The choices are "OFF", "SIMPLE" and "FULL". Press "+" or "-" to select.
Input Signal
New Re-input
O X
O O
O O
Determines the automatic adjustment level for Auto Adjust. The choices are "SIMPLE",
"FULL" and "DETAIL". Press "+" or "-" to select. Refer to the below table.
Contrast
O X
O O
O O
English-15
" to highlight another tag.
Adjustment Items
H-size, Fine, H/V-Position
*
*
*
Black Level, Long cable capability*
X
X
O
Contrast
-
-
*
1
Time
1.5 seconds
2 seconds
10 to 20 seconds