Table of Contents
Advertisement
Available languages
Available languages
Appendix
If you need detailed information about the controls, please use the advanced menu.
<How to use the advanced menu>
• Turn off your monitor.
• Turn on your monitor by pushing the "POWER" and "SELECT" button at the same time for
at least one second simultaneously.
• You will see the Advanced menu.
This menu is larger than the normal OSM.
<How to exit the advanced menu>
• Turn off and restart your monitor in the normal way.
To make an adjustment, ensure that the tag is highlighted, then press "SELECT."
To move to another tag, press "EXIT," then press "
Tag1
Brightness
Contrast
Auto Black Level
(Analog input only)
Auto Contrast
(Analog input only)
Black Level
(Analog input only)
Auto Brightness
R-H. position
Tag2
(Analog input only)
G-H. position
(Analog input only)
B-H. position
(Analog input only)
R-SHARPNESS
(Analog input only)
G- SHARPNESS
(Analog input only)
B- SHARPNESS
(Analog input only)
Signal
Tag3
(Analog input only)
Auto SW
(Analog input only)
Automatic adjustment level
"Size" "Fine"
"Position"
SIMPLE
FULL
DETAIL
O : Automatic adjustment is performed.
X : Automatic adjustment is not performed.
*1: Black level, RGB sharpness, RGB delay and RGB position are adjusted using Long Cable Software (included).
Adjusts the overall image and screen background brightness. Press "+" or "-" to adjust.
Adjusts the image brightness and contrast in relation to the background. Press
"+" or "-" to adjust.
Automatically adjusts the black level. Press "SELECT" to adjust.
Adjusts the image displayed for non-standard video inputs. Press "SELECT" to
adjust. Any adjustment requires the image to have white portions.
Manually adjusts the black level. Press "+" or "-" to adjust.
This function adjusts the brightness automatically for the best CONTRAST and
BRIGHTNESS setting based on the white display area.
Adjusts the position of the red component of the image. Press "+" or "-" to
adjust.
Adjusts the position of the green component of the image. Press "+" or "-" to
adjust.
Adjusts the position of the blue component of the image. Press "+" or "-" to
adjust.
Adjusts the sharpness of the red component of the image. Press "+" or "-" to
adjust.
Adjusts the sharpness of the green component of the image. Press "+" or "-" to
adjust.
Adjusts the sharpness of the blue component of the image. Press "+" or "-" to
adjust.
Determines when the automatic adjustment is activated. The choices are "OFF",
"SIMPLE" and "FULL". Press "+" or "-" to select.
Input Signal
Signal
Setting
New signal
Re-input
"H-size" "Fine" "H/V-Position"
OFF
O
X
SIMPLE
O
O
FULL
O
O
O : Automatic adjustment is performed on adjustments marked with *.
X : Automatic adjustment is not performed.
NOTE: Automatic adjustment does not work at a resolution lower than 800x600.
Determines the automatic adjustment level for Auto Adjust. The choices are
"SIMPLE", "FULL" and "DETAIL". Press "+" or "-" to select. See table below.
"Contrast"
Long cable capability *1
O
X
O
O
O
O
49
" or "
" to highlight another tag.
Adjustment Items
Contrast
*
X
*
X
*
*
Black level,
Time
X
1.5 seconds
X
2 seconds
O
10 to 20 seconds
Advertisement
Table of Contents
