Pass/Fail Test Criteria - Intel RS25AB080 Tested Hardware And Operating System List

Table of Contents

Advertisement

RS25AB080
Intel
RAID Controller
®
Note: Intel does not provide a support commitment for operating systems, adapter cards, and
peripherals not listed in this document. Intel will consider requests for support on a case-by-
case basis.
1.2

Pass/Fail Test Criteria

For each operating system, adapter, and peripheral configuration, a test passes if specific
criteria are met. Specific configurations with particular characteristics are addressed on a case-
by-case basis. In general, a configuration passes testing if the following conditions are met:
The operating system installed without error.
Manufacturer's installation instructions or Intel's best-known methods were used for
-
the operating system installation.
No extraordinary workarounds were required during the operating system
-
installation.
-
The server system behaved as expected during and after the operating system
installation.
-
Application software installed and executed normally.
Hardware compatibility tests ran to completion without error.
Test software suites executed successfully:
Test and data files were created in the correct directories without error.
-
Files copied from the client to the server and back match the original without error.
-
Clients remain connected to the server system.
-
Industry-standard test suites run to completion without error.
-
Revision 1.0
THOL
Introduction
3

Advertisement

Table of Contents
loading

Table of Contents