Brightness/Contrast Controls - NEC MultiSync FP1375X User Manual

Controls
OSM (On-Screen Manager) control buttons on the front of the monitor
function as follows:
EXIT
CONTROL L/M
CONTROL -/+
PROCEED
RESET
D-SUB/DVI-I
When OSM controls are activated, icons are displayed at the top of the
menu. If an arrow (¡) is displayed in a sub-menu, it indicates further
choices are available. To enter a sub-menu, press PROCEED.

Brightness/Contrast Controls

Brightness: Adjusts the overall image and background screen
brightness.
Contrast: Adjusts the image brightness in relation to the background.
Main Menu
Exits the OSM menu.
Moves the highlighted
area up/down to select
one of the controls.
Moves highlighted area
left/right to select one of
the controls.
Has no function.
With OSM menu screen,
reset.
NOTE: When RESET is pressed in the main and
sub-menu, a warning window will appear
allowing you to cancel the reset function.
Without OSM menu screen, push to select the signal input
connector, D-SUB (VGA) or DVI-I.
NOTE: When the DVI input has been changed,
you must restart your computer.
English-7
Sub-Menu
Exits to the OSM main menu.
Moves the highlighted area
up/down to select one of the
controls.
Moves the bar in the - or +
direction to decrease or
increase the adjustment.
Only executes control or
enters sub-menu.
Resets all the controls within
the highlighted menu to the
factory setting.