NEC MultiSync FP1375X User Manual page 11

GlobalSync Control: Eliminates picture impurities that may result from
the earth's magnetic field. While in the sub-menus (GLOBALSYNC, TOP
LEFT, TOP RIGHT, BOTTOM LEFT or BOTTOM RIGHT), use the –/+
control buttons to fine tune the GlobalSync corrections.
Note: NEC recommends that you perform GlobalSync correction
while running a typical application such as a spreadsheet or
text document.
Auto Save: The monitor automatically saves the last settings of the user
controls.
Factory Preset: Selecting Factory Preset allows you a reset most OSM
control settings back to the factory settings. A warning statement will
appear to confirm that you do want to reset ALL settings. Individual
settings can be reset by high-lighting the control to be reset and pressing
the RESET button.
Tools 2
Language: OSM controls menus are available in six languages.
OSM Position: You can choose where you would like the OSM controls
menu to appear on your screen. Selecting OSM Position allows you to
manually adjust the OSM controls menu left, right, up or down.
OSM Turn Off: The OSM controls menu will stay on as long as it is in
use. In the OSM Turn Off sub-menu, you can select how long the
monitor waits after the last touch of a button for the OSM controls menu
to disappear. The preset choices are 10, 20, 30, 45, 60 and 120
seconds.
OSM Lock Out: This control completely locks out access to all OSM
controls functions except Brightness and Contrast. When attempting to
activate OSM controls while in the lock out mode, a screen will appear
indicating that OSM controls are locked out. To activate the OSM Lock
Out function, press PROCEED, then press L and hold down
simultaneously. To deactivate the OSM Lock Out, press PROCEED, then
press L and hold down simultaneously.
IPM System Off Mode:
Enable: The IPM System works normally and all stages of energy
savings are utilized.
Disable: The Off Mode of the IPM System is not used.
English-10