Remove Monitor Stand For Mounting - NEC AccuSync LCD174WXM User Manual

Tilt
Grasp both sides of the monitor screen with your hands
and adjust the tilt as desired (Figure TS.1).
NOTE: Handle with care when tilting the monitor screen.

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place monitor face down on a nonabrasive surface (Figure R.1).
3. Remove the 2 screws that connect the monitor to the stand and slide the
stand off from the LCD (Figure R.2).
The monitor is now ready for mounting in an alternate manner.
4. Connect the AC cord and signal cable to the back of the monitor (Figure R.3).
5. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
NOTE: Handle with care when removing monitor stand.
Figure R.1
Figure R.3
Quick Start
Figure TS.1
Figure R.2
5
- continued