Quick Start - NEC A3842 User Manual

NEC-ADA201 Eng/Fr. manual

Quick Start

How to attach IntelliBase
MultiSync brand monitor
®
MAKE SURE THE MONITOR IS DISCONNECTED FROM THE SYSTEM
AND IS UNPLUGGED FROM THE WALL OUTLET BEFORE ANY
WORK IS DONE ON THE MONITOR.
FOR 21-INCH MONITORS, IT IS ADVISED THAT TWO PEOPLE ARE
INVOLVED DURING THE ENTIRE INSTALLATION PROCESS.
To attach the IntelliBase to your MultiSync brand monitor, the original base
must first be removed. Depending on the model of your MultiSync brand
monitor, the removal procedure of the original base and the attachment of
the IntelliBase will vary. Locate the model name (located in the lower right
corner of your monitor's bezel) of your MultiSync brand monitor in the table
below. Follow the removal procedure to detach the original base from your
monitor using the diagrams on the following pages and attach the
IntelliBase to your monitor.
MultiSync Monitor Model Names
MultiSync 50, MultiSync 70, XV15 and
XV15+
MultiSync 90, XE15, XE17, XP15, XP17,
XV17, XV17+, A500, A500+, A700,
A700+, A900, E500, E700, E900, E900+,
M500, M700 and P750
MultiSync XE21, XP21, E1100, E1100+,
P1150 and P1250+
9/8/98 12:25 PM Page 5
Audio to your
™
Removal and IntelliBase
2
Original Monitor Base
Installation Instructions
Page 3
Page 5
Page 7