Print Speed; Interface Mode - Epson TM-P80 Technical Reference Manual

Print speed

Selectable from levels 1 to 10 (Slow  Fast) (initial setting: level 10)
Depending on print conditions, such as print duty, print head temperature, and data
transmission speed, print speed is automatically adjusted, which may cause white lines due
to intermittent print (the motor sometimes stops). To avoid this, keep the print speed
constant by setting it lower.

Interface mode

Selectable from: automatic selection, fixed to wireless LAN/Bluetooth interface, or fixed to built-
in USB.
 The TM-P80 has dual interfaces: a built-in USB interface and another interface selected
 Automatic selection:
For Wi-Fi models
Interface mode
Automatic selection (initial setting)
Fixed to Wireless LAN
Fixed to built-in USB
For Bluetooth models
Interface mode
Automatic selection (initial setting)
Fixed to Bluetooth
Fixed to built-in USB
48
by the customer, wireless LAN or Bluetooth. The tables below describe the modes you
can set for the printer to control the dual interfaces.
When the USB cable is connected with a host PC, the USB interface is preferentially
selected. Otherwise, the wireless LAN/Bluetooth interface is selected. Once the
interface is selected, the selection is enabled until the power is turned off or the USB
cable is disconnected.
Wireless LAN
Not available
Not available
Built-in USB
Available Available
Available Not available
Available
Bluetooth Built-in USB
Available Available
Available Not available
Available