Wireless Lan Interface - Epson TM-P80 Technical Reference Manual

Wireless LAN Interface

When using the wireless LAN interface, it is recommended to connect the printer to a host PC
via the USB cable first and use EpsonNet Config to set wireless LAN settings.
 When you set up the access point at the same time, set the access point in advance and
 Examine the radio wave situation in the surrounding area before use.
 Avoid using the same channel that is used in the neighboring shops where wireless LAN is used.
 When using the printer in environments where kitchen microwaves and other devices
 In the infrastructure mode, W53 and W56 channels are not available to connect to a
38
check that it operates correctly.
that may interfere radio waves are installed, observe the following points.
 Keep the printer away from the devices, such as kitchen microwaves, that may cause
radio wave interference.
 Use channels that are away from the frequency bands that may cause radio wave interference.
 Place shields between the printer and the devices that may cause radio wave interference.
 Select either 2.4 GHz or 5 GHz, whichever is free from radio wave interference.
 In auto channel setting for the access point, do not select a channel in which the
devices may cause radio wave interference.
stealth SSID access point.