Epson TM-P80 Technical Reference Manual page 40

Acquisition of the setting information
Acquire the following information from the network administrator.
• Network mode
• SSID: This is set for each network of the SSID wireless LAN. Set the same setting as the access
point.
• WEP, WPA, WPA-Personal/Enterprise: This is a security setting and a cipher key. Set the same
setting as the access point.
• Channel
• IP address
• Subnet mask
• Gateway address
Follow the steps below to connect the printer.
1
Connect the printer to a PC via the USB cable.
See "USB Interface" on page
2
Turn on the host computer.
3
Turn on the printer.
4
Start up the EpsonNet Config.
When the EpsonNet Config is started up, the battery LED (the remaining battery charge is
indicated) goes off and the Feed button is disabled.
5
Double-click on the printer.
40
37.