Terminal Panel - NEC PlasmaSync 42XC10 User Manual

Part Names and Functions
1
OUT
IN
EXTERNAL CONTROL DVD/HD3
2
3
1) EXTERNAL CONTROL OUT (D-Sub 9 pin)
Connect RS-232C output to a second monitor.
2) EXTERNAL CONTROL (D-Sub 9 pin)
Connect RS-232C input to external equipment such as a
PC in order to control RS-232C functions.
3) DVD/HD3 (HDMI)
Input digital HDMI signals.
4) DVI
Input digital RGB signals from a computer or HDTV
device having a digital RGB output.
5) AUDIO3
Input the audio signal from external equipment such as a
computer, VCR or DVD player.
6) VGA (Mini D-Sub 15 pin)
Analog computer input.
7) AUDIO2
Input the audio signal from external equipment such as a
computer, VCR or DVD player.
R
L
(MONO)
DVI AUDIO3 VGA
4 5 6
9
DVD/HD2
R R
L L
Y Cr/Pr Cb/Pb
(MONO) (MONO)
AUDIO2 DVD/HD1 AUDIO1
7 8 10
8) DVD/HD1
Connect equipment such as a DVD player, HDTV device,
or set-top box.
9) DVD/HD2
Connect equipment such as a DVD player, HDTV device
or set-top.
10) AUDIO1
Input the audio signal from external equipment such as a
computer, VCR or DVD player.
11) S-VIDEO in
Input S-video.
12) VIDEO1
Composite video input.
13) EXTERNAL SPEAKER (L and R) connector
Connects to optional speakers. Output the audio signal
from AUDIO 1, 2, and 3 to external speakers.
NOTE: Speaker Terminal is for 8W + 8W (8 ohm).
14) AC IN
Connects with the supplied power cord.
Information:
For SCART connections there are 2 ways to connect:
SCART1: Connect R/G/B to the DVD/HD1 terminals and
composite sync. to the VIDEO1 terminal.
SCART2: Connect R/G/B + composite sync. to the VGA
terminal.
English-10

Terminal Panel

12
IN
R L
S-VIDEO IN
VIDEO SPEAKER (S)
11
13
AC IN
14