Picture Settings Menu - NEC PlasmaSync 42XC10 User Manual

Operation
- continued

Picture Settings Menu

Storing picture settings
Th is function stores the current input signal and PICTURE
menu settings in memory in order to recall these settings if
necessary. Up to six diff erent settings can be stored.
Notes of up to 15 characters long can also be stored along
with each setting.
Example: Storing picture settings at MEMORY1
On the "PICTURE MEMORY" function under the
"PICTURE" menu, select "MEMORY1" and press the SET
button. Th e "PICTURE MEMORY" screen appears.
PICTURE MEMORY
OFF: Picture memory not used.
MEMORY1 TO 6: Choose the desired memory slot to set.
Th ere are 6 to choose from, independent of inputs.
SETTING THE MEMORY
Use the p and q buttons to select the desired memory slot,
from MEMORY1 to MEMORY6.
Use the t and u buttons to select "SET", then press the SET
button.
If necessary, input a note.
RESETTING THE MEMORY
Use the p and q buttons to select the desired memory slot,
from MEMORY1 to MEMORY6, then use the t and u
buttons to select "RESET", and press the SET button.
Th e memory is cleared, and "—" is displayed in the "INPUT",
"SIGNAL" and "NOTE" columns.
INPUTTING NOTES
Use the t and u buttons to select "NOTE", then press the
SET button.
Use the p and q button to select the character.
Use the t and u buttons to move the cursor.
Use the SET button to delete the character at the cursor
position.
When you have fi nished inputting the note, press the EXIT
button.
English-22