Remote Control - NEC PlasmaSync 42XC10 User Manual

Remote Control Functions
POWER ON
1
2
RGB DVD/HD
3
4
PICTURE
MODE
SIZE
5
6
1
4
7
7
DISPLAY
8
9
AUTO
SET UP
10
11
VOL
+
12
SPLIT SCREEN
PIP
13
SELECT/FREEZE CAPTURE
SWAP
REMOTE ID
SET RESET
14
REMOTE CONTROLLER RU-M113
1) POWER ON/STANDBY
Switches the power on/standby.
*If the Power Indicator on the display is not glowing,
then no controls will work.
2) VIDEO
Switches the input signal to the VIDEO source.
3) RGB
Switches the input signal to the RGB source.
4) DVD/HD
Switches the input signal to the DVD/HD source.
5) PICTURE MODE
Selects Picture Mode: [STANDARD], [BRIGHT],
[CINEMA1], [CINEMA2], [DEFAULT].
STANDARD: for viewing in a bright room
BRIGHT: brighter picture than STANDARD
CINEMA1, 2: for viewing in a dark room, good for
movies
DEFAULT: factory default settings
Part Names and Functions
STANDBY
PICTURE
VIDEO MEMORY
22
2 3
5 6
8 9
0
MENU
15
16
+
SET
17
EXIT
18
ZOOM
19
POINTER
+
MUTE
20
S BY S SINGLE
SLEEP
21
6) SIZE
Set the aspect ratio of the image.
7) KEYPAD
Set REMOTE ID.
8) DISPLAY
Turn on/off the Information OSD.
9)
Move selection up or down
10) AUTO SETUP
Adjusts the CLOCK PHASE, CLOCK, and POSITION
settings automatically. (Analog RGB signal input only)
11) POINTER
Turn on/off the pointer.
12) VOLUME
Increases/Decreases sound level.
13) SPLIT SCREEN
PIP: Picture-in-Picture mode.
S BY S: Side-by-side mode.
SINGLE: Returns to normal mode.
SWAP: Swaps the Split Screen images.
SELECT/FREEZE: Selects which input is active when
in split screen mode.
When the PICTURE FREEZE function (see OSD
FUNCTION) is operating, SELECT/FREEZE can be
used to display still pictures on the sub screen.
CAPTURE : Captures still picture.
14) REMOTE ID
Activates REMOTE ID function.
15) MENU
Turns ON/OFF menu mode.
16) SET
Makes selection.
17) - , +
Increases or decreases amount of adjustment.
18) EXIT
Goes to the previous menu.
19) ZOOM
Enlarges or reduces the picture.
20) MUTE
Mutes audio output.
21) SLEEP
Sleep timer.
22) PICTURE MEMORY
Switches memory settings from 1 to 6.
English-11
- continued