On-Screen Display (Osd); Using The Osd - NEC PlasmaSync 42XC10 User Manual

On-Screen Display (OSD)

Using the OSD

Use the Remote Control or the control panel on the front
of the unit to enter the on-screen display menu to adjust
settings.
1. Press the MENU button on the remote or the EXIT
button on the Control Panel.
2. Use the up and down buttons to select the desired menu.
3. Press the SET button to select a sub-menu or item for
adjustment.
Press UP or DOWN
button to select
sub-menu.
Remote
Control
Press UP or DOWN
Control
button to select.
Panel
OSD Screen
VGA
SCREEN
PICTURE
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
FILM MODE
PICTURE MODE
ADVANCED OSD is OFF. Not all OSD functions will be
available when the ADVANCED OSD is off.
Press SET.
Press INPUT
button to decide.
FUNC.
FUNCTION SET UP INFO
OFF
OFF
HIGH
ON
STANDARD
4. Change the setting or adjustment by pressing the + and
- buttons on the Control Panel or the Remote Control.
5. Press the EXIT button on the Remote Control, on the
Control Panel to return to the previous menu.
NOTE: Not all menu functions may be available. To access
all functions the Advanced OSD option must be
turned on in the ADVANCED OSD menu.
Press UP, DOWN, PLUS,
or MINUS to select the
function or setting to be
adjusted.
Press UP, DOWN, PLUS,
or MINUS to select.
VGA
PICTURE
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
FILM MODE
PICTURE MODE
GAMMA
SET UP LEVEL
COLOR CONTROL
Advanced OSD is ON. All OSD functions are shown, but
some OSD functions may not be available.
English-14
Press MENU or EXIT.
Press EXIT.
FUNC.
SCREEN FUNCTION SET UP INFO
OFF
OFF
HIGH
ON
STANDARD
2.2
0%