To Reset The Adjustment Value (To The Factory Default Setting) During The Setting - NEC 42/50PD1 User Manual

To Reset the Adjustment Value (to
the Factory Default Setting) During
the Setting
1. Press the VISUAL NORMAL button or RASTER
NORMAL button.
The verification sub menu is displayed.
VISUAL
NORMAL
2. A press of the PROCEED button will reset the
adjustment.
To cancel the reset, press the EXIT button.
WARNING
ABOUT TO RESET
*****
PRESS:
'PROCEED' TO RESET
'EXIT' TO CANCEL
PROCEED
Automatic Storage
After the adjustment, the setting values are stored
automatically. Note that automatic storage is not available
in the following instance.
RASTER
NORMAL
28