Other Setting Screens (1) - NEC 42/50PD1 User Manual

Other Setting Screens (1)

This allows the following settings: WIDE MODE, COLOR
SYSTEM, RGB MODE, POWER ON MODE, POWER
MANAGER, EXTERNAL CONTROL, HDTV SELECT,
and ALL RESET.
1. Align the cursor with icon (13) of the second page.
The cursor is moved left and right with the POSITION
CONTROL / buttons.
Other Setting Screens (1)
Icon (13)
WIDE MODE
COLOR SYSTEM
RGB MODE
POWER ON MODE
POWER MANAGER
EXTERNAL CONTROL
ALL RESET
2. Align the cursor with the desired item
POSITION / CONTROL
Move up
WIDE MODE
COLOR SYSTEM
RGB MODE
POWER ON MODE
POWER MANAGER
EXTERNAL CONTROL
ALL RESET
3. Press the / buttons and set
* The / buttons are used to switch the various
items in toggle fashion as described below.
* WIDE MODE:
NORMAL/FULL/STADIUM/ZOOM (Initial value:
NORMAL)
Note that only NORMAL/FULL area available in RGB
mode.
Selecting Native Resolutions for 848 x 480, 852 x 480 and
640 x 480 input signals
There are two controls in the PlasmaSync 42/50PD1 OSM
menus that allow you to set the monitor to display
resolutions with 848, 852 and 640 horizontal dots in their
true resolutions. These are located under icon #13 (tools)
and icon #6 (auto).
: ZOOM
: AUTO
: STILL
: LAST MEM
: OFF
: OFF
Move down
: ZOOM
: AUTO
: STILL
: LAST MEM
: OFF
: OFF
When inputting an 848 x 480 signal, align the cursor with
icon # 13 (tools) at the top of the OSM window. Move the
cursor down to WIDE MODE and use the POSITION
LEFT/RIGHT control to select NORMAL. The monitor
will display the signal at 848 x 480. If FULL is selected,
the monitor will automatically expand the input signal to
853 x 480.
To choose between 640 x 480 and 852 x 480 resolutions
align the cursor with icon 6 (auto) at the top of the OSM
window, move the cursor down to MODE and...
Use the POSITION LEFT/RIGHT control to select WIDE
to display 852 x 480 in true resolution or to expand (stretch)
640 x 480 to fill the screen from left to right. Select
NORMAL to display 640 x 480 resolution in its standard
4:3 aspect ratio with vertical letterbox bars to the right and
left of the image.
After selecting the desired setting, go to the Auto menu, set
auto picture to OFF and use the Picture Adjust and Fine
Picture controls to adjust clock phase and frequency to
sharpen the image, if necessary.
* COLOR SYSTEM:
AUTO/3.58 NTSC/PAL/SECAM/4.43 NTSC (Initial value:
AUTO)
* RGB MODE:
RGB MODE is displayed at the time of RGB input, RGB
MODE is not displayed at the time of video input.
Initial value : STILL
At time of RGB input
[MOTION]: Set when a scan converter or other
moving picture has been connected
[STILL]: Set when displaying a personal com-
puter screen
[DTV]: Set when using digital broadcast or
other sources with an RGB input
This is used in signal discrimination at the time of
RGB input.
Note: When a moving picture is displayed in still
picture mode, the screen will appear blurry.
* POWER ON MODE:
LAST MEM/VIDEO/RGB1/RGB2/RGB3 (Initial
value: LAST MEM (Last Memory))
* POWER MANAGER:
This means Power management of RGB input
ON/OFF (Initial value is OFF)
* EXTERNAL CONTROL:
OFF/1/2 (Initial value is OFF)
RS-232C can be used when "1" selected.
Open/Short control can be used when "2" is selected.
4. Return to the main menu
* To delete the main menu, press the EXIT button once more.
44
EXIT