Application; Default Setting; Basic Operation; Front Control Panel Layout - NEC LCD1501-BK Service Manual

1. Application

This adjustment specification shall be applied to the adjustment of the LCD1501 (Model No. NL2501).

2. Default setting

Item
Power Supply
Input Freq.
BRIGHTNESS
CONTRAST
Color Temp.
OSM TRUN OFF
OSM LOOK OUT
OSM
Resolution notifier
SETTING
OFF TIMER
OSD/OSM
SETTING
URL SETTING
HOT KEY
LANGUAGE

3. Basic operation

3.1 Front control panel layout

AC100V~240V
1024×768@75Hz
100%
50%
NATIVE
30 sec.
NO
ON
OFF
OSM
WWW.NEC-MITSUBISHI.COM
ON
ENGLISH
EXIT Button
CONTROL Button
ADJUST Button
SELECT Button
RESET Button
EXIT Button
Exits the OSM controls.
Exits to the OSM main menu.
CONTROL Button
Moves the highlighted area left/right to select control menus.
Moves the highlighted area up/down to select one of the controls.
ADJUST Button
Moves the bar left/right to increase or decrease the adjustment.
SELECT Button
Active Auto Adjust function. Enter the OSM controls.
Enter the OSM sub menu.
RESET Button
Resets the highlighted control menu to the factory setting.
Condition
Power Button
Power Lamp
4-2