Making Connections - Radial Engineering MR5 User Manual

MAkING CONNECTIONS

1. Connect the MIDI output from your MIDI
controller or pedal board to the input of the MR5
using a standard 5-pin MIDI cable. Additional
MIDI devices can be daisy chained via the
MR5's MIDI THRU connector.
2. Connect the MR5 XLR outputs to the JR5 inputs
of the Radial JX44, JX42 or any other product
that employs a JR5 footswitch. The MR5 is
equipped with dedicated XLR outputs for both
'Amps' and 'Guitars'. No power is required, as
the MR5 will derive its power from the Radial
device that you are controlling.
3. If you wish to use a JR5 footswitch in conjunction
with the MR5, simply connect one of its XLR
jacks to the MR5 and the other to the JR5 input
on your Radial device. The pedal will now be
in-line with the MR5, and your Radial device will
respond to commands from both.
Radial Engineering Ltd.
MIDI XLR
MIDI CONTROLLER
4
MIDI CABLE
JX44
JX42
Instrument select only
MR5™ User Guide