Related Manuals for Radial Engineering JD-7
Summary of Contents for Radial Engineering JD-7
- Page 1 Radial Engineering Ltd. 1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada Tel: 604-942-1001 • Fax: 604-942-1010 Email: info@radialeng.com Radial JD-7 owner’s manual v2.1 01/2022 Part #: R870 1015 00...
- Page 2 Radial Engineering Ltd. 1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada Tel: 604-942-1001 • Fax: 604-942-1010 • Email: info@radialeng.com...
- Page 3 JD7 Block Diagram...
- Page 4 Ch. 6 Loop sent to & from multi effect processor Guitar A to Guitar B to Ch. 5 Loop sent to & from pedal boar Input-A Input-B Ch. 7 Output to Rockman Rear Balanced Direct Out T o mix/record Ch. 5 Front Ch.
- Page 5 Channel-1 on-off switch Channel-1 on/off indicator ‘Drag’ control Channel-1 output Direct coupled Second instrument input 8dB pad for Input-2 Ov erload LED indicator Input selector switch Primary guitar input...
- Page 6 Channel output - Transformer isolated Channel-1 output Polarity reverse - 180º Direct coupled Ground lift Channel-1 on/off indicator Channel on/off active indicator Channel-1 on-off switch On-off switch Effect loop bypass switch Effect loop input Effect loop output from gutar effect. to guitar effect.
- Page 7 Ch.-7 out Balanced out Polarity reverse Pin 2 / Pin 3 Ground Lift - Pin 1 Balanced out Input level adjust Ground Lift - Pin 1...
- Page 8 For Re-Mix - Connect the guitar and amplifiers as usual. Take direct output from balanced XLR male output to mixer and recorder. Record the dry track. Replay the dry track, sending the signal to the XLR female input on the JD7. Select ‘INPUT-2’ by depr e ssing the ‘Select’ switch on the front panel to turn on the XLR input.
- Page 11 Amplifier: Microphone: Note: Channel 1 [ ] - 2 [ ] On [ ] Bright [ ] Treble boost [ ] Guitar: Input Gain Treble bass presence master Mid boost [ ] [ ] Input A [ ] Pad Amplifier: Microphone: Note: [ ] Input B...