Advertisement
Quick Links
RADIAL ENGINEERING LTD. ("Radial") warrants this product to be free from defects in material and workman-
ship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair
or replace (at its option) any defective component(s) of this product (excluding fi nish and wear and tear on com-
ponents under normal use) for a period of three (3) years from the original date of purchase. In the event that a
particular product is no longer available, Radial reserves the right to replace the product with a similar product
of equal or greater value. To make a request or claim under this limited warranty, the product must be returned
prepaid in the original shipping container (or equivalent) to Radial or to an authorized Radial repair center and you
must assume the risk of loss or damage. A copy of the original invoice showing date of purchase and the dealer
name must accompany any request for work to be performed under this limited warranty. This limited warranty
shall not apply if the product has been damaged due to abuse, misuse, misapplication, accident or as a result of
service or modifi cation by any other than an authorized Radial repair center.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE HEREOF AND DE-
SCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIM-
ITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE OF THREE YEARS.
RADIAL SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LOSS ARISING FROM THE USE OF THIS PRODUCT. THIS WARRANTY GIVES YOU SPE-
CIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY DEPENDING ON
WHERE YOU LIVE AND WHERE THE PRODUCT WAS PURCHASED.
Radial Engineering Ltd.
1638 Kebet Way, Port Coquitlam BC V3C 5W9
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com • web: www.radialeng.com
Radial 8ox and 8cx Owner's Manual - Part #R870 1185 • V1.0
Specifi cations and appearance are subject to change without notice.
RADIAL ENGINEERING LTD.
3 YEAR TRANSFERABLE WARRANTY
Advertisement
Related Manuals for Radial Engineering 8cx
Summary of Contents for Radial Engineering 8cx
- Page 1 3 YEAR TRANSFERABLE WARRANTY RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and workman- ship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or replace (at its option) any defective component(s) of this product (excluding fi...
- Page 2 True to the Music 8ox and 8cx Owner’s Manual Eight Channel • Transformer Isolated • Microphone Splitters 8ox Rackmount R800 8003 - Radial Transformers R800 8004 - Jensen Transformers 8cx Install R800 8002 - Radial Transformers R800 8001 - Jensen Transformers Radial Engineering Ltd.
- Page 4 INTRODUCTION Congratulations on your purchase of a Radial microphone splitter. This manual covers installation and operation for both 8ox and 8cx microphone splitters. We recommend that you take a few minutes to read through this manual in order to familiarize yourself with the many innovative features that are built in.
- Page 5 Consistent unit-to-unit performance is achieved through precision computer controlled winding. The core is sealed in- side a mu-metal can which provides enhanced shielding from electromagnetic interference. The built in Bessel low pass fi lter removes ultrasonic distortion that can mask natural sound and cause ear-fatigue. Radial Engineering Ltd. 8ox & 8cx Owner’s Manual...
- Page 6 The three paralleled inputs employ a RF network fi lter on their terminals. ground paths to prevent unused inputs from acting like anten- nas when the ground is lifted. Any radio frequencies picked up by an open pin will be shunted to ground. Radial Engineering Ltd. 8ox & 8cx Owner’s Manual...
- Page 7 8ox to earth. set to “lifted” allowing the chassis to “fl oat” ungrounded and should remain this way unless a specifi c grounding scheme requires the signal ground to be tied to the chassis. Radial Engineering Ltd. 8ox & 8cx Owner’s Manual...
- Page 8 • Connect pin-3 (COLD) to the - terminal. + - G + - G + - G + - G NOTE: Euroblocks are optional equipment and must be ordered separately (Radial order number R800 8050). Radial Engineering Ltd. 8ox & 8cx Owner’s Manual...
- Page 9 AC mains circuit with- out creating ground loops. AC Mains AC Mains AC Mains Circuit 2 Circuit 1 Circuit 1 Earth Earth Recorder Monitors Main PA Isolated Output Direct with Lift Direct Output Radial Engineering Ltd. 8ox & 8cx Owner’s Manual...
- Page 10 8ox chassis to your technical ground. in the side of the chassis. Rear panel chassis screw used for bonding to technical ground. Radial Engineering Ltd. 8ox & 8cx Owner’s Manual...
- Page 11 Typically, 8cx splitters are mounted in an electrical box located in a utility room or under the stage. The 8cx is designed to fi t in standard size NEMA electrical junction boxes.
- Page 12 To ensure proper shielding from external noise it is important that the enclosure be bonded to ground (earth). Conduit installed by electrical trades is usually bonded to the buildings main ground which is ideal for the 8cx. If you are mounting in another type of metal enclosure ensure it has a connection to ground.