Advertisement
DIP switches 6-7:
The amplifier switching capability of the MR5 can be selected using MIDI Control
Changes, Program Changes, or both. Switches 6 and 7 select how the MR5 will
respond to these messages.
DIP switch 8:
No current function
MIDI IMPLEMENTATION CHART (CONT. NEXT PAGE)
The MR5 is setup to respond to both MIDI Control Changes and Program changes. Control changes can select both guitars and
individual amplifiers on the JX44. Program changes are reserved for amplifier selection only, which allows for custom configurations
with multiple amplifiers on devices like the JX44. The following chart shows which instruments and amplifiers will be activated
when the MR5 sees various Control and Program changes sent by your MIDI pedal board or sequencer:
CC 88 off 0..63/on 64..127
CC 89
CC 90
CC 91
CC 92
CC 93
CC 94
CC 95
Radial Engineering Ltd.
GUITAR 1
GUITAR 2
GUITAR 3
ON
ON
GUITAR 4
Amp Out 1
ON
ON
ON
8
DIP #
6
Amp PC
DOWN
Amp CC
UP
Amp PC and CC
DOWN
Amp Out 2
Amp Out 3
ON
ON
MR5™ User Guide
7
UP
DOWN
DOWN
Amp Out 4
ON
Advertisement
