Connections; Installing The Recording Paper - Panasonic KX-FT982LS-B Service Manual

8.2.

Connections

Important:
• The unit will not function when there is a power failure.
To make calls in emergency situations, you should con-
nect a telephone that can function during a power fail-
ure to the telephone line.
(1) Paper stacker (KX-FT984/KX-FT988 only)
• Make sure the paper stacker must not touch the wall.
(2) Power cord
• Connect to the power outlet (220 V ~ 240V, 50/60 Hz).
(3) Telephone line cord
• Connect to [LINE] jack and a single telephone line jack.
(4) [EXT] jack (KX-FT982/KX-FT984 only)
• Remove the stopper if attached.
(5) Handset cord
(6) Extension telephone (not included)
Caution:
• When you operate this product, the power outlet should
be near the product and easily accessible.
• Keep the unit away from walls as far as possible to pre-
vent a recording paper jam.
Note:
Before you can make calls, the dialling mode setting may
need to be changed.
8.3.

Installing the Recording Paper

1. Open the top cover by pressing the top cover release but-
ton ( ).
2. Install the recording paper.
3. Insert the leading edge of the paper into the opening
above the thermal head (
4. Pull the paper out of the unit.
• Make sure that there is no slack in the paper roll.
51
KX-FT982LS-B / KX-FT984LS-B / KX-FT988LS-B
).