Panasonic KX-FT932RU-B Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Fax Machine
  5. KX-FT932RU-B
  6. Service manual

Panasonic KX-FT932RU-B Service Manual

Personal facsimile
Hide thumbs
Table of Contents

Advertisement

Quick Links

KX-FT932RU-B
KX-FT932CA-B
KX-FT932UA-B
KX-FT934RU-B
KX-FT934CA-B
KX-FT934UA-B
B : Black Version
(for Russia)
(for Kazakhstan, Uzbekistan)
(for Ukraine)
© 2006 Panasonic Communications Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.
ORDER NO.KMF0605958CE
Personal Facsimile

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-FT932RU-B

Summary of Contents for Panasonic KX-FT932RU-B

  • Page 1 ORDER NO.KMF0605958CE Personal Facsimile KX-FT932RU-B KX-FT932CA-B KX-FT932UA-B KX-FT934RU-B KX-FT934CA-B KX-FT934UA-B B : Black Version (for Russia) (for Kazakhstan, Uzbekistan) (for Ukraine) © 2006 Panasonic Communications Co., Ltd. All rights reserved. Unauthorized copying and distribu- tion is a violation of law.

  • Page 2: Table Of Contents

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 15.2. Gear Section --------------------------------------------- 133 1.1. For Service Technicians ----------------------------------3 15.3. Jams ------------------------------------------------------- 139 1.2. AC Caution---------------------------------------------------4 15.4. Cleaning--------------------------------------------------- 140 1.3. Personal Safety Precautions ----------------------------5 16 Miscellaneous -------------------------------------------------- 141 1.4. Service Precautions ---------------------------------------6 16.1.

  • Page 3: Safety Precautions

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 1 Safety Precautions 1. Before servicing, unplug the AC power cord to prevent an electric shock. 2. When replacing parts, use only the manufacturer's recommended components. 3. Check the condition of the power cord. Replace if wear or damage is evident.

  • Page 4: Ac Caution

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 1.1.2. How to recognize that Pb Free Solder is Used P.C.Boards marked as “PbF” use Pb Free solder. (See the figure below.) (Example:Digital board) Note: The “PbF” marked may be found on different areas of the same P.C.Board,depending on manufacture date.

  • Page 5: Personal Safety Precautions

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 1.3. Personal Safety Precautions 1.3.1. Moving Sections of the Unit Be careful not to let your hair, clothes, fingers, accessories, etc., become caught in any moving sections of the unit. The moving sections of the unit are the rollers and a gear. There is a separation roller and a document feed roller which are rotated by the document feed motor.

  • Page 6: Service Precautions

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 1.4. Service Precautions 1.4.1. Precautions to Prevent Damage from Static Electricity Electrical charges accumulate on a person. For instance, clothes rubbing together can damage electric elements or change their electrical characteristics. In order to prevent static electricity, touch a metallic part that is grounded to release the static...

  • Page 7: Warning

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 2 Warning 2.1. About Lead Free Solder (PbF: Pb free) Note: In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that con- tains lead. We will use PbF solder when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver, (Ag), and Copper, (Cu).

  • Page 8: Specifications

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 3 Specifications Applicable Lines: Public Switched Telephone Network Document Size: Max. 216 mm in width Max. 600 mm in length Effective Scanning Width: 208 mm 216 × max. 30 m roll Recording Paper Size: Effective Printing Width: 208 mm Transmission Time* Approx.

  • Page 9: General/Introduction

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 4 General/Introduction 4.1. Optional Accessories Model No. Item Specifications/Usage 216 mm × 30 m roll, with 25 mm core KX-A106 Standard thermal recording paper* Use only the included or specified recording paper. Using other recording paper may affect print quality and/or cause excessive wear to the thermal head.

  • Page 10: Features

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 4.2.3. Error Message (Display) 5 Features 5.1. Integrated Telephone System • Redialing function General • Phonebook function (100 names) • LCD (Liquid Crystal Display) readout • Caller ID compatible** **Feature requires a subscription to caller identification ser- Facsimile vices offered by certain local telephone companies for a tee.

  • Page 11: Technical Descriptions

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6 Technical Descriptions 6.1. Connection Diagram...

  • Page 12: General Block Diagram

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.2. General Block Diagram The following is an outline of each device IC on the digital board. (Refer to General Block Diagram (P.13).). 1. ASIC (IC1) Composed mainly of an address decoder and a modem control. Controls the general FAX operations.
  • Page 13 32:(5 6833/< %2$5' 23(5$7,21 3$1(/ 7DFW 6: /&' 3$1(/ (QJOLVK  OLQHV 0(66$*( *$7( 6(1625 [ $55$< 'RF VHQVRU 5HDG SRVLWLRQ VHQVRU 0,& .(< 0$75,; 1RW 8VHG 3&217 9 ',*,7$/ %2$5' $1$/2* %2$5' )/$6+ )/$6+ '5$0 0ELW 0ELW 36+257 0ELW ,& 352*5$0 7$0 0RGHO ...

  • Page 14: Control Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.3. Control Section 6.3.1. ASIC (IC1) This custom IC is used for the general FAX operations. 1. CPU: KB for the image processing. This model uses a Z80 equivalent to the CPU operating 7. THERMAL HEAD I/F: at 12 MHz. Most of the peripheral functions are performed Transmits the recorded data to the thermal head.
  • Page 15 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B SIGNAL POWER SUPPLIED DESCRIPTION VOLTAGE VDD (3.3V) ----- POWER SOURCE (+3.3V) MIDAT/IOP 3.3V PORT (TONE1EN) MICLK/IOP 3.3V OUTPUT PORT (TONE2EN) MILAT/IOP 3.3V PORT (HSRXEN) 20KOSC/IOP 3.3V OUTPUT PORT (PWRCNT) XWAIT 3.3V INPUT PORT (HOOK) HSTRD/IOP 3.3V INPUT PORT (TEST) HSTWR/IOP 3.3V...
  • Page 16 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B SIGNAL POWER SUPPLIED DESCRIPTION VOLTAGE STB2 3.3V STROBE SIGNAL OUTPUT TO THERMAL HEAD STB3 3.3V OUTPUT PORT (NC) XRESET 3.3V RESET INPUT VDD (3.3V) ----- POWER SOURCE (+3.3V) POWER SOURCE (GND) POWER SOURCE (GND) VDD (3.3V) ----- POWER SOURCE (+3.3V) XORESET 3.3V...
  • Page 17 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.3.2. Flash Memory (IC2) This 512KB ROM (FLASH MEMORY) carries a common area of 32KB and bank areas which each have 8KB (BK4~BK63). The addresses from 0000H to 7FFFH are for the common area and from 8000H to 9FFFH are for the bank areas.
  • Page 18 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.3.5. RTC Back up Circuit 1. Function This unit has a lithium battery (BAT1) which works for the Real Time Clock (RTC, Integrated into ASIC:IC1). The RTC continues functioning, even when the power switch is OFF, backed up by a lithium battery.
  • Page 19 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.3.6. Supervision Circuit for the Thermal Head Temperature 1. Function The thermistor changes the resistor according to the temperature and uses the thermistor's characteristics. The output of pin 139 of IC1 becomes a low level. Then when it becomes a high level, it triggers point A. In point C, according to the voltage output time, the thermal head's temperature is detected.

  • Page 20: Facsimile Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.4. Facsimile Section 6.4.1. Image Dara Flow During Facsimile Operation Copy (Fine, Super-Fine, Photo) 1. Line information is read by CIS (to be used as the reference white level) via route (1), and is input to IC1. Refer to Block Dia- gram (P.21)

  • Page 21: Block Diagram

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.4.2. Block Diagram...

  • Page 22: Thermal Head

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.4.3. Thermal Head 1. Function This unit utilizes state of the art thermal printer technology. The recording paper (roll paper) is chemically processed. When the thermal head contacts this paper it emits heat momen- tarily, and black dots (appearing like points) are printed on the paper. If this continues, letters and/or diagrams appear, and the original document is reproduced.
  • Page 23 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B...
  • Page 24 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.4.4. Scanning Block The scanning block of this device consists of a control circuit and a contact image sensor made up of a celfoc lens array, a light source, and photoelectric conversion elements. When an original document is inserted and the start button pressed, pin 129 of IC1 goes to a high level and the transistor Q14 turns on.This applies voltage to the light source to light it.
  • Page 25 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.4.5. Stepping Motor Drive Circuit 1. Function One individual stepping motor is used for transmission and reception. It feeds the document or recording paper synchronized for reading or printing. 2. Circuit Operation During motor drive, ASIC IC1 pin 124 becomes a high level, and Q2 and Q1 go ON as a result. +24 V is supplied tothe motor coil.

  • Page 26: Sensors And Switches

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.5. Sensors and Switches All of the sensors and switches are shown below. Sensor Circuit Sensor Sensor or Switch Name Message Error Location DIGITAL Motor Position Sensor [CALL SERVICE] Cutter Position Sensor (FT934 ONLY) [PAPER JAMED] ANALOG Recording Paper Sensor...
  • Page 27 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.5.1. Motor Position Sensor This sensor is a detection switch for recording the position of the CAM. Digital Board Signal (IC1-119 Pin) Home position Low level Other High level 6.5.2. Cutter Position Sensor (KX-FT934 ONLY) Digital Board Signal (IC1-131 Pin)
  • Page 28 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.5.4. Hook Switch (SW2) When the handset is lifted, the switch turns ON, and the signal at pin 43 of IC1 becomes low. When the handset is returned, the switch turns OFF, and the signal at pin 43 of IC1 becomes high.
  • Page 29 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.5.6. Document Top Sensor (SW39) When a document is brought to the read position, the SW becomes ON, and the input signal of IC1-5 pin (Operation) becomes a low level. When there is no document at the read position, the SW becomes OFF, and the input signal of IC1-5 pin (Operation) becomes a high level.

  • Page 30: Modem Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.6. Modem Section 6.6.1. Function The unit uses a 1 chip modem (IC5) that serves as an interface between the control section for FAX transmission and reception and the telephone line. During a transmitting operation, the digital image signals are modulated and sent to the telephone line.
  • Page 31 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Phase A: Call setting Call setting can be manual/automatic. Phase B: Pre-message procedure Phase B is a pre-processing procedure and sequence for confirming the status of the terminal, transmission route, etc., and for terminal control. It implements terminal preparation status, determines and displays terminal constants, confirms synchroniza- tion status, etc.
  • Page 32 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6. Explanation of Communication and Compression Technology a. G3 Communication Signals (T. 30 Binary Process) For G3 Facsimile communication, this is the procedure for exchanging control signals between the sending and receiving machines both before and after transmission of image signals.
  • Page 33 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Bit No. DIS/DTC Receiver --- T.4 operation Receiver --- T.4 operation 11,12,13,14 Data signaling rate Data signaling rate 0,0,0,0 V.27 ter fall back mode 2400 bit/s, V.27 ter 0,1,0,0 V.27 ter 4800 bit/s, V.27 ter 1,0,0,0 V.29 9600 bit/s, V.29 1,1,0,0 V.27 ter and V.29...
  • Page 34 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Bit No. DIS/DTC Reserved for future recording width capability. Extend field Extend field R8×15.4 lines/mm R8×15.4 lines/mm 300×300 pels/25.4 mm 300×300 pels/25.4 mm R16×15.4 lines/mm and/or 400×400 pels/25.4 mm R16×15.4 lines/mm and/or 400×400 pels/25.4 mm Inch based resolution preferred Resolution type selection "0": neritic based resolution...
  • Page 35 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B b. Redundancy Compression Process Coding Mode This unit uses one-dimensional MH format.
  • Page 36 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.6.2. Modem Circuit Operation The modem (IC5) has all the hardware satisfying the CCITT standards mentioned previously. When the ASIC IC1 (61) is brought to a low level, the modem (IC5) is chip-selected and the resistors inside IC are selected by the select signals from ASIC (IC1) ADR0-ADR4.

  • Page 37: Ncu Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.7. NCU Section 6.7.1. General It is composed of bell detection circuit, pulse dial circuit, line amplifier, sidetone circuits. 6.7.2. Bell Detection Circuit 1. Circuit Operation The signal waveform for each point is indicated below. The signal (low level section) input to pin 23 of ASIC IC1 on the digital board.
  • Page 38 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.7.5. Line Amplifier and Side Tone Circuits 1. Circuit Operation The reception signal received as output from line transformer T1 is given as input to R81, C17, R13 and IC2(2). Then it is input to the reception system at an amplifier gain of 2.5 dB from pin (2).
  • Page 39 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.7.6. Calling Line Identification Circuit 1. Function This unit is compatible with the Caller ID service offered by your local telephone company. To use this feature, you must sub- scribe to a Caller ID service. The data for the caller ID from the telephone exchange is sent during the interval between the first and second rings of the bell signal.
  • Page 40 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.7.7. Calling Line Identification Circuit (DTMF) 1. Function This unit is compatible with the Caller ID service offered by your local telephone company. To use this feature, you must sub- scribe to a Caller ID service. The data for the Caller ID from the telephone exchange is sent before the first ring signal. The data from the telephone exchange is sent by DTMF signal.

  • Page 41: Its (Integrated Telephone System) And Monitor Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.8. ITS (Integrated Telephone System) and Monitor Section 6.8.1. General The general ITS operation is performed by the modem IC5. The alarm tone, the key tone, the calling tone and the beep are output from the ASIC IC1 (digital board).
  • Page 42 +2.0V +24VA ZNR1 POS1 RLY1 +5VD BELL/ +24V Analog Board RLY1 Digital Board R221 R220 C217 C216 To IC5 R219 D506...

  • Page 43: Operation Board Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.10. Operation Board Section The unit consists of a LCD (Liquid crystal display), KEYs and LEDs (light-emitting diodes). They are controlled by the Gate Array (IC1) and ASIC (IC1: on the DIGITAL BOARD). The key matrix table is shown below.

  • Page 44: Lcd Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.11. LCD Section The Gate Array IC(IC1) works only for writing the ASCII code from the data bus (D4~D7). V0 is supplied for the crystal drive. R25, R24, R15 and R17 are density control resistors. Consequently, in this unit, the timing (positive clock) is generated by the LCD interface circuitry in the gate array (IC1).

  • Page 45: Power Supply Board Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 6.12. Power Supply Board Section This power supply board uses the switching regulator method. [Input Circuit] The input current goes into the input rectifier circuit through the filter circuit. The filter circuit decreases the noise voltage and the noise electric field strength.
  • Page 46 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B The following is an overview of how the power supply unit is controlled. The control method of this power supply unit is pulse width modulation. When Q is ON, the energy is charged in the transfer primary coil according to E .
  • Page 47 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B [Surge Absorber Circuit] This circuit is for absorbing surge voltage generated by the transformer. [Control Circuit and Detecting Circuit] The control circuit amplifies the output with increased voltage detected in the error detecting circuit. Then it drives the main transis- tor.

  • Page 48: Location Of Controls And Components

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 7 Location of Controls and Components 7.1. Overview (1) Speaker (2) Document guides (3) Paper stacker (KX-FT934 only) • The paper stacker may not be shown in all illustrations in these operating instructions. (4) Document feeder tray (5) Top cover...

  • Page 49: Control Panel

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 7.2. Control Panel Buttons (9) [TONE] • To change from pulse to tone temporarily during dialling (1) [ABH] (FT932/934UA ONLY) when your line has rotary pulse services. [AOH] (FT932/934RU-CA ONLY) (10) [PAUSE] • To use Caller identification features. • To insert a pause during dialling.

  • Page 50: Installation Instructions

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 8 Installation Instructions 8.2. Connections Important: 8.1. Installation Space • The unit will not function when there is a power failure. To make calls in emergency situations, you should con- The space required to install the unit is shown below.

  • Page 51: Installing The Recording Paper

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 8.3. Installing the Recording Paper 5. Close the top cover securely by pushing down on both sides. 1. Open the top cover by pressing the top cover release but- ton ( 6. For KX-FT932: 2. Install the recording paper.

  • Page 52: Operation Instructions

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 9 Operation Instructions 9.1. Setting Your Logo Your logo will be printed on the top of each page sent from your unit. The logo can be your name or the name of your company. Note: Refer to Other (P.9) for display message.
  • Page 53 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B To select characters with dial keypad 4. Press [ ] to move the cursor to the next space and press [5] 3 times. To change uppercase or lowercase letters Pressing the [ ] button will change to uppercase or lower- case letters alternately.

  • Page 54: Test Mode

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 10 Test Mode The codes listed below can be used to perform simple checks for some of the unit’s functions. When complaints are received from customers, they provide an effective tool for identifying the locations and causes of malfunctions. To do this, you set the Service mode (Refer to Operation Flow (P.56).) first, then operate the below test items.

  • Page 55: Dtmf Single Tone Transmit Selection

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 10.1. DTMF Single Tone Transmit Selection When set to ON (=1), the 12 keys and transmission frequencies are as shown. High Frequency (Hz) Low Frequency (Hz) High (Hz) 1209 1336 1477 “1” “5” 1209 Low (Hz) “2” “6” 1336 “1”...

  • Page 56: Service Mode

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 11 Service Mode The programming functions are used to program the various features and functions of the machine, and to test the machine. This facilitates communication between the user and the service man while programming the unit. 11.1. Programming and Lists 11.1.1.
  • Page 57 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 11.1.3. Service Function Table Code Function Set Value Effective Default Remarks Range Pause time X 100 msec 001~600 ---------- Flash time X 10 ms 01~99 ---------- Dial speed select 1: 10 pps 1, 2 ---------- 2: 20 pps Bell detection time...
  • Page 58 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Code Function Set Value Effective Default Remarks Range Time between CED and 300bps 1:75 msec See Symptom/Countermeasure Table for long dis- 2:500 msec tance and international calls in The unit can copy, but 3:1 sec cannot transmit/receive (P.83). Refer to Receive Problem(P.82) and The unit can copy, but cannot...
  • Page 59 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 11.1.4. Memory Clear Specification Execute Service Mode #550 when you want to reset the all setting data keeping the user information. Execute Service Mode #710 to clear the user information in case that Main Unit is recycled. Note: Please restart a power supply after clearing a memory.

  • Page 60: The Example Of The Printed List

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 11.2. The Example of the Printed List 11.2.1. User Mode (Example of a printed out list) (FT932/KX-FT934) Note: The above values are the default values.
  • Page 61 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 11.2.2. Service Mode Settings (Example of a printed out list) (FT932/KX-FT934) Note: The above values are the default values.
  • Page 62 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 11.2.3. History (Example of a printed out list) Note: See the following descriptions of this report. Item No. (1) ~ (44) are corresponding to the listed items in Descriptions of the History Report (P.63).
  • Page 63 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 11.2.3.1. Descriptions of the History Report (1) SOFTWARE VERSION (31) Not used FLASH ROM version (32) NUMBER OF DIVIDED PRINTING IN FAX RECEPTION (2) SUM The number of faxes received that were divided into more than FLASH ROM internal data calculation.

  • Page 64: Troubleshooting Guide

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12 Troubleshooting Guide 12.1. Troubleshooting summary 12.1.1. Troubleshooting After confirming the problem by asking the user, troubleshoot according to the instructions and observe the following precautions. 12.1.2. Precautions 1. If there is a problem with the print quality or the paper feed, first check if the installation space and the print paper meets the specifications, the paper selection lever/paper thickness lever is set correctly, and the paper is set correctly without any slack.

  • Page 65: Error Messages-Display

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.2. Error Messages-Display Erase unnecessary items. If the unit detects a problem, one or more of the following messages will appear on the display. The explanations given in the [ ] are for servicemen only. • There is something wrong with the unit’s modem.

  • Page 66: Error Messages Report

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3. Error Messages Report 12.3.1. Journal Report 1. Press [MENU] repeatedly to display “PRINT REPORT”. 2. Press [ ] or [ ] until the “JOURNAL REPORT” is displayed. 3. Press [SET]. 4. The report is printed out. Note: Refer to Error Message (Report) (P.9) for display message.
  • Page 67 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B...
  • Page 68 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B CROSS REFERENCE: Test Mode(P.54)
  • Page 69 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B CROSS REFERENCE: Test Mode(P.54)
  • Page 70 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B CROSS REFERENCE: Test Mode(P.54)
  • Page 71 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B...
  • Page 72 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B CROSS REFERENCE: Maintenance(P.131) ADF (Auto Document Feed) Section(P.93) Operation Panel Section(P.170) CROSS REFERENCE: Test Mode(P.54)
  • Page 73 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B...
  • Page 74 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B...
  • Page 75 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B CROSS REFERENCE: Test Mode(P.54)
  • Page 76 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3.2. Special service journal reports Journal 2 and Journal 3 shown below, which are special journals giving the additional detailed information about the latest 30 communications, can be printed by Service Code 881 or 882. Remote printing function for the journal reports (JOURNAL, JOURNAL 2 and JOURNAL 3) is also available for service technicians.
  • Page 77 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3.2.1. Journal 2 Refer to JOURNAL 2 in Printout Example(P.78). Journal 2 displays the additional detailed information about the last 30 communications. Descriptions: (1) RCV. MODE Indicates which receive mode the unit was in when the unit received a fax message.
  • Page 78 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3.2.2. Journal 3 Refer to JOURNAL 3 in Printout Example (P.78). (9) ERROR LINE(RX) Descriptions: When an error occurs while receiving a fax, this shows the (6) ENCODE number of error lines. Compression Code: MH/MR (10) MAKER CODE (7) MSLT This shows a 2 digit code of the other party's fax machine MSLT means Minimum Scan Line Time.
  • Page 79 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3.3. Communication Section Find the problem in the table shown below, and refer to the corresponding troubleshooting procedure in Defective Facsimile Section (P.80). Symptom Content Possible cause The paper is not fed properly when faxing. Troubleshooting Problem with the feeding mecha- (Nor in the copy mode.)
  • Page 80 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3.3.1. Defective Facsimile Section 12.3.3.1.1. Transmit Problem Note: Refer to Other (P.9) for display message. CROSS REFERENCE: Operation Panel Section(P.113) ADF (Auto Document Feed) Section(P.93) Maintenance(P.131)
  • Page 81 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3.3.1.2. Sometime there is a transmit problem Note: Refer to Error Message (Display) (P.10) for display message. Note: • "596: Transmit level set" represents a service code. (Refer to Service Function Table(P.57).)
  • Page 82 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3.3.1.3. Receive Problem First confirm whether the recording paper is installed properly or not before starting troubleshooting. (Refer to "Remarks".) Note: "596: Transmit level set" represents a service code. (Refer to Service Function Table(P.57).) Remarks: Regarding the reception problem, we have investigated the conceivable causes in the flow chart except for the software-related errors.
  • Page 83 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3.3.1.4. The unit can copy, but cannot transmit/receive CROSS REFERENCE: Analog Board Section(P.108) Test Mode(P.54)
  • Page 84 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3.3.1.5. The unit can copy, but cannot either transmit/receive long distance or interna- tional communications The following two causes can be considered for this symptom. Cause 1: The other party is executing automatic dialing, the call has been received by this unit, and the CED or DIS signal response time is too long.
  • Page 85 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B (Causes and Countermeasures) Countermeasure Side Echo Communication Problem Example Countermeasure Service Code Sending side Some time is needed to compare the level Add a dummy signal to the beginning of Service code (521) of the receiving and sending signals for the the training signal.
  • Page 86 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Fig. c (Countermeasure by Changing the Interval Between CED and DIS) Fig. d (Countermeasure by Ignoring the 1st DIS) <TX side signal> <RX side signal> <Countermeasure> 2nd / 3rd DCS / Training & delayed CFR / FTT at TX side 2nd / 3rd EOP / EOM / MPS &...
  • Page 87 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.3.3.1.7. How to record fax signal by using PC Recording FAX signal is one of the useful analysis measures to solve communication problems. The way of recording easily by using PC is shown as follows. 1. Equipment • 1 jig Parts No.

  • Page 88: Remote Programming

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.4. Remote Programming If, after the call is connected, the customer describes the situation and it is determined that the problem can be corrected by making parameter changes, this function makes it possible to change parameters such as the user code and service code from another fax (using DTMF tones).
  • Page 89 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.4.2. Program Mode Table Code Function Set Value Default Remote Set- ting Set date and time dd/mm/yy hh:mm 01 Jan. 2006 Your logo --------- None Your FAX number --------- None Print sending report 1:ERROR / 2:ON / 3:OFF FAX ring count 1-4 / 5: EXT.TAM...
  • Page 90 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Code Function Set Value Default Remote Set- ting Memory clear except History data --------- --------- Transmit speed select 1:9600/ 2:7200/ 3:4800/ 4:2400 9600bps Receive speed select 1:9600/ 2:7200/ 3:4800/ 4:2400 9600bps Redial tone detect 1:ON / 2:OFF Power on film feed...

  • Page 91: Troubleshooting Details

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5. Troubleshooting Details 12.5.1. Outline Troubleshooting is for recovering quality and reliability by determining the broken component and replacing, adjusting or clean- ing it as required. First, determine the problem then decide the troubleshooting method. If you have difficulty finding the broken part, determine which board is broken.
  • Page 92 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.3. Troubleshooting Items ITEM SYMPTOM REFERENCE No feed See No Document Feed (P.93) (Auto Document Feeder) Paper jam See Document Jam (P.94) Multiple feed See Multiple Feed (P.95) Skew See Skew (P.96) Printing Skewed receiving image. See Skewed Receiving Image (P.98) Image is distorted.
  • Page 93 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.4. ADF (Auto Document Feed) Section 12.5.4.1. No Document Feed Note: (*1) : Refer to Multiple Feed (P.95) (*2) : Refer to How to Remove the Operation Board, LCD and Platen Roller (P.122) (*3) : Refer to Test Mode (P.54) (*4) : Refer to Digital Board Section (P.100)

  • Page 94: Document Jam

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.4.2. Document Jam CROSS REFERENCE: Test Mode (P.54) Sensor Section (P.114) Note: (*1) : Refer to How to Remove the Operation Board, LCD and Platen Roller (P.122) (*2) : Refer to Disassembly and Assembly Instructions (P.118)
  • Page 95 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.4.3. Multiple Feed Note: (*1) : Refer to How to Remove the Separation Holder and Document Feed Support (P.123) (*2) : Refer to Disassembly and Assembly Instructions (P.118) (*3) : Refer to Maintenance (P.131)
  • Page 96 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.4.4. Skew Note: (*1) : Refer to Maintenance Items and Componet Locations (P.131) (*2) : Refer to Disassembly and Assembly Instructions (P.118) (*3) : Refer to How to Remove the Separation Holder and Document Feed Support (P.123) (*4) : Refer to How to Remove the Operation Board, LCD and Platen Roller (P.122)
  • Page 97 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.4.5. Image is Distorted (When printing) CROSS REFERENCE: Thermal Head Section (P.116). Test Mode(P.54) CIS (Contact Image Sensor) Section (P.115). Note: (*1) : Refer to Maintenance Items and Componet Locations (P.131) (*2) : Refer to Disassembly and Assembly Instructions (P.118)
  • Page 98 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.4.6. Black or White Vertical Lines Appear CROSS REFERENCE: Test Mode(P.54) Digital Board Section (P.100) Note: (*1) : Refer to How to Remove the Lock Lever and Thermal Head (P.126) (*2) : Refer to Maintenance Items and Componet Locations (P.131) (*3) : Refer to How to Remove the Operation Board, LCD and Platen Roller (P.122)
  • Page 99 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.4.8. When Coping or Printing, an Abnormal Sound is Heard from the Unit Note: (*1) : Refer to Document Feeder Cleaning (P.140) (*2) : Refer to Thermal Head Cleaning (P.141) (*3) : Refer to Disassembly and Assembly Instructions (P.118) (*4) : Refer to How to Remove the Motor of Gear Block (P.129)

  • Page 100: Digital Board Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.5. Digital Board Section When the unit fails to boot up the system, take the troubleshooting procedures very carefully. It may have a serious problem. The symptom: No response when the power is turned on. (No LCD display, and keys are not accepted.) The first step is to check the power source.
  • Page 101 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.5.1. Digital Block Diagram Digital board is including analog system. All analog signals (Telephone, CID and TAM) excepting Fax communications. Another one is ASIC system for mechanical functions: Copy, Fax and UI (LCD/Key). And serial interface (UART) connects both systems.
  • Page 102 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B NG Wave pattern Note: Refer to NG Example (P.107).
  • Page 103 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Normal Wave Patterns Remarks: When you use an oscilloscope to judge whether a signal to be tested is normal or NG, perform the signal check in exactly the same order as in [List 1]. (If the ASIC fails to access the ROM, the ASIC cannot access DRAM normally.) The digital circuit actually operates according to the timing combinations of these signals.
  • Page 104 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B I/O and Pin No. Diagram...
  • Page 105 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.5.2. Check the Status of the Digital Board First, please check voltages and oscillation whether they are correct as follows.
  • Page 106 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B...
  • Page 107 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.5.3. NG Example...
  • Page 108 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.6. Analog Board Section This chapter provides the testing procedures required for the analog parts. A signal route to be tested is determined depending upon purposes. For example, the handset TX route begins at the handset microphone and the signal is output to the telephone line.
  • Page 109 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.6.2. Defective ITS (Integrated Telephone System) Section 1. No handset and monitor transmission / reception Following the ITS section or NCU section, search for the route between the microphone and the telephone line (sending) or between the telephone line and the speaker (receiving) where the signal disappears.
  • Page 110 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.7. Power Supply Board Section 12.5.7.1. Key Components for Troubleshooting Check the following parts first: F101, D101-D104, C106, Q101 and IC101. This comes from our experience with experimental tests. For example: power supply and lightning surge voltage test, withstanding voltage test, intentional short circuit test, etc.
  • Page 111 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.7.2. Troubleshooting Flow Chart...
  • Page 112 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.7.3. Broken Parts Repair Details (D101, D102, D103, D104) Check for a short-circuit in terminal 4. If D101, D102, D103 and D104 are short-circuits, F101 will melt (open). In this case, replace all of the parts (D101, D102, D103, D104, F101).

  • Page 113: Operation Panel Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.8. Operation Panel Section 12.5.8.1. No Key Operation CROSS REFERENCE: Test Mode(P.54) 12.5.8.2. No LCD Indication CROSS REFERENCE: Test Mode(P.54)
  • Page 114 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.9. Sensor Section Refer to Sensors and Switches (P.26) for the circuit descriptions. 12.5.9.1. Check the Document Sensor (SW39)...."CHECK DOCUMENT" Note: Refer to Error Message (Display) (P.10) for display message. 12.5.9.2. Check the Read Position Sensor (SW38)...."REMOVE DOCUMENT" Note:...
  • Page 115 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.10. CIS (Contact Image Sensor) Section Refer to Scanning Block (P.24). CROSS REFERENCE: Test Mode(P.54)
  • Page 116 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 12.5.11. Thermal Head Section Refer to Thermal Head(P.22).

  • Page 117: Service Fixture & Tools

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 13 Service Fixture & Tools...

  • Page 118: Disassembly And Assembly Instructions

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14 Disassembly and Assembly Instructions 14.1. Disassembly Flowchart 14.1.1. Upper Cabinet Section CROSS REFERENCE: A-1 : How to Remove the Paper Stacker (KX-FT934 only) (P.120) A-2 : How to Remove the Operation Panel Block (P.121) A-3 : How to Remove the Operation Board, LCD and Platen Roller (P.122) A-4 : How to Remove the Separation Holder and Document Feed Support (P.123)
  • Page 119 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.1.2. Lower Cabinet Section CROSS REFERENCE: A-1 : How to Remove the Paper Stacker (KX-FT934 only) (P.120) A-6 : How to Remove the Cutter Unit (KX-FT934 only) (P.125) B-1 : How to Remove the Bottom Frame (P.127) B-2 : How to Remove the Analog Board, Digital Board, Power Supply Board and Power Cord (P.128) B-3 : How to Remove the Gear Block and Separation Roller (P.129)

  • Page 120: Disassembly Procedurel

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2. Disassembly Procedurel 14.2.1. How to Remove the Paper Stacker (KX-FT934 only)

  • Page 121: How To Remove The Operation Panel Block

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2.2. How to Remove the Operation Panel Block...
  • Page 122 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2.3. How to Remove the Operation Board, LCD and Platen Roller...
  • Page 123 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2.4. How to Remove the Separation Holder and Document Feed Support...
  • Page 124 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2.5. How to Remove the Image Sensor (CIS) and Feed Roller...
  • Page 125 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2.6. How to Remove the Cutter Unit (KX-FT934 only)
  • Page 126 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2.7. How to Remove the Lock Lever and Thermal Head...

  • Page 127: How To Remove The Bottom Frame

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2.8. How to Remove the Bottom Frame...
  • Page 128 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2.9. How to Remove the Analog Board, Digital Board, Power Supply Board and Power Cord...
  • Page 129 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2.10. How to Remove the Gear Block and Separation Roller 14.2.11. How to Remove the Motor of Gear Block...

  • Page 130: Installation Position Of The Lead Wires

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 14.2.12. Installation Position of the Lead Wires...

  • Page 131: Maintenance

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15 Maintenance 15.1. Maintenance Items and Componet Locations 15.1.1. Outline MAINTENANCE AND REPAIRS ARE PERFORMED USING THE FOLLOWING STEPS. 1. Periodic maintenance Inspect the equipment periodically and if necessary, clean any contaminated parts. 2. Check for breakdowns Look for problems and consider how they arose.
  • Page 132 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15.1.2.1. Maintenance List OPERATION CHECK REMARKS Document Path Remove any foreign matter such as paper. ---------- Rollers If the roller is dirty, clean it with a damp cloth then dry thoroughly. Refer to How to Remove the Image Sensor (CIS) and Feed Roller (P.124).

  • Page 133: Gear Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15.2. Gear Section This section shows how the motor-driven gear mechanism works in the main operations: FAX transmission, FAX reception the motor and copying. 15.2.1. Mode Selection When the motor attached to the Drive Motor Gear rotates counterclockwise (CCW), Swing Gear A engages the CAM and the CAM turns counterclockwise to select a mode.
  • Page 134 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15.2.2. Mode Operation Once a mode is selected, the Drive Motor Gear rotates clockwise (CW) and then the Swing Gear A-1 controls the mode opera- tion. 15.2.2.1. TX Mode Swing Gear A engages Gear TX and conveys its drive power to the Separation Roller Gear for pre-feeding documents.

  • Page 135: Copy Mode

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15.2.2.3. Copy Mode Swing Gear A and B engage Gear TX and Gear RX respectively and drive both the Separation Roller Gear and the Platen Roller Gear for feeding documents and recording paper in the copying operation. Fig. D: Copy mode 15.2.2.4.
  • Page 136 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15.2.2.5. Cutter Mode (KX-FT934only) Swing gear C engages the gear cutter and conveys its drive power to cutter unit for cutting recording paper. Fig. F: Cutter mode 15.2.3. Mechanical Movements in the Main Operations 15.2.3.1. Idle Status...
  • Page 137 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15.2.3.2. Scanning 15.2.3.3. Printing CROSS REFERENCE: Sensor Section (P.114) Error Messages-Display (P.65) Note: See Sensors and Switches (P.26)
  • Page 138 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15.2.3.4. Copying CROSS REFERENCE: Sensor Section (P.114)

  • Page 139: Jams

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15.3. Jams 15.3.1. Recording Paper Jams 5. Install the recording paper and close the top cover securely by pushing down on both sides. 1. Open the top cover by pressing the top cover release but- (See page Installing the Recording Paper (P.51)) ton ( 2.

  • Page 140: Cleaning

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15.4. Cleaning 15.4.1. Document Feeder Cleaning Clean the document feeder when: - Documents frequently misfeed. - Smudges or black/white lines appear on the original docu- ment when sending or copying. 1. Disconnect the power cord and the telephone line cord.

  • Page 141: Miscellaneous

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 15.4.2. Thermal Head Cleaning If smudges or black/white lines appear on a copied/received document, check whether there is dust on the thermal head. Clean it to remove the dust. 1. Disconnect the power cord and the telephone line cord.
  • Page 142 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 16.1.2. Analog Board...
  • Page 143 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 16.1.3. Operation Board 16.1.4. Power Supply Board...

  • Page 144: How To Replace The Flat Package Ic

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 16.2. How to Replace the Flat Package IC Even if you do not have the special tools (for example, a spot heater) to remove the Flat IC, with some solder (large amount), a soldering iron and a cutter knife, you can easily remove the ICs that have more than 100 pins.

  • Page 145: Bridge Modification Procedure

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 2. Apply flux to all pins of the FLAT PACKAGE IC. 3. Solder the pins, sliding the soldering iron in the direction of the arrow. 16.2.4. Bridge Modification Procedure 1. Lightly resolder the bridged portion. 2. Remove the remaining solder along the pins using a soldering iron as shown in the figure below.

  • Page 146: Test Chart

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 16.3. Test Chart 16.3.1. ITU-T No.1 Test Chart...
  • Page 147 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 16.3.2. ITU-T No.2 Test Chart...

  • Page 148: Schematic Diagram

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 17 Schematic Diagram 17.1. Digital Board 4M DRAM 4M FLASH MOTOR BLOCK FOR PROGRAM A[4] D[0] A[5] D[1] A[6] D[2] A[0] A[0] D[0] 20 A0 A[7] D[3] A[1] A[1] D[1] RBA[0] D[4] A[2] A[2] D[2] D[0] RBA[1] D[5] A[3]...
  • Page 149 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 4M FLASH FOR VOICE A[0] D[0] 20 A0 +5VA A[1] D[1] 19 A1 A[2] D[2] 18 A2 +24LV FAX TX signal A[3] D[3] 17 A3 +24LV A[4] D[4] +5VA 16 A4 A[5] D[5] 15 A5 A[6] D[6] FAX RX signal...

  • Page 150: Analog Board

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 17.2. Analog Board +24VA 120K +2.0V J150p 100K 300:600 K0.1u D10p 50V4.7u 100K K0.1u +12V 120K J150p 330K J82p +24V K0.1u +24V J120p 430K +2.0V PAPER LINETX TONE1 (10) K0.1u K0.022u Z0.1u P_SHORT BELL/DCN 1A2K HOOK (11) LINERX MONRX...
  • Page 151 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B FAX TX signal FAX RX signal C52 K680p C53 K680p 50V4.7u TO TEL LINE RLY1 POS1 22 1/4W (PU AT DIGITAL BOARD) 120K TO EXT. TEL 250V1u 47K 1/2W 3.0V 3.0V D0AF473JA013 (10) K0.068u 1K2A +24V (11) RLY1 K0.1u...

  • Page 152: Operation Board

    +5VA +5VA TO LCD TO MIC TO DIGITAL MIC+ MIC- MICIN KSTART KLATCH KRXD KTXD KSCLK OPERST 34 LATCH LED1 35 START XLED15 36 LED2 XLED14 37 LED3 XLED13 38 LED4 VSS-18 SW39 39 VSS-39 VDD-17 40 VDD-40 XLED11 41 LED5 XLED12 42 KIN0 KIN7...

  • Page 153: Power Supply Board

    C110 1000p T101 TRANS C202 1000p/1k R107 100k/2 CN202 R106 C107 D202 D102 D101 47/2 47p/1k Q101 D103 D104 R109 R223 C205 R105 Q203 0.1/25 0.22/2 C102 R225 D205 D206 R123 R122 (Q202) Q201 C103 1.8K (C207) 1000p C121 R111 D106 D202 (R227) (C208)

  • Page 154: Printed Circuit Board

    +5VA 32.7 1.25A R128 IC15 R125 C114 D507 R159 C214 D502 TEST C212 C227 C169 C142 C211 C170 R160 C228 R211 C235 R208 REF-CH PCB-CH R227 R203 C234 AUTO-CH IC10 R229 C236 C237 C100 YELLOW BLUE C129 R172 CN10 C103 CN206 PFUP1546Z KX-FT932/934RU/UA/CA: Digital Board (Component View)
  • Page 155 KX-FT932/934RU/UA/CA: Digital Board (Bottom View)

  • Page 156: Analogue Board

    POS1 FLT3 KX-FT932/934RU/UA/CA: Analog Board (Component View)
  • Page 157 +24VA LINE KX-FT932/934RU/UA/CA: Analog Board (Bottom View)

  • Page 158: Operation Board

    PFUP1560Z SW36 SW33 SW29 SW37 LED1 RECORD ERASE PLAYACK AT.ANS SW30 S1 SW35 S4 CALLER ID SW28 S2 SW34 S5 FLASH SW19 SW14 3 SW27 SW31 S6 PCB-CH STOP REDIAL SW10 5 SW20 SW15 6 SW26 SW32 PAUSE SW23 COPY BROADCAST MENU SW12 8...
  • Page 159 KX-FT932/934RU/UA/CA: Operation Board (Bottom View)

  • Page 160: Power Supply Board

    (COMPONENT VIEW) SRF 1678EK PRIMARY D204 T3.15A 250V C105 SECONDARY D106 D103 C208 C103 PC101 JP203 C107 R111 R106 T101 D201 Brown Q101 CN31 R107 D205 C207 D202 C110 R202 JP103 C101 SEE SOLDER SIDE C106 (BOTTOM VIEW) KX-FT932/934RU/UA/CA : POWER SUPPLY BOARD...

  • Page 161: Appendix Information Of Schematic Diagram

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 19 Appendix Information of Schematic Diagram Note: 1. DC voltage measurements are taken with an oscilloscope or a tester with a ground. 2. The schematic diagrams and circuit board may be modified at any time with the development of new technology.
  • Page 162 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B MEMO...

  • Page 163: Exploded View And Replacement Parts List

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 20 Exploded View and Replacement Parts List 20.1. Cabinet, Mechanical and Electrical Parts Location 20.1.1. Operation Panel Section...

  • Page 164: Upper Cabinet Section

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 20.1.2. Upper Cabinet Section 20.1.2.1. KX-FT932RU/UA/CA...
  • Page 165 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 20.1.2.2. KX-FT934RU/UA/CA...
  • Page 166 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 20.1.3. Lower Cabinet Section...
  • Page 167 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 20.1.4. Gear Block Section...
  • Page 168 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 20.1.5. Screws...

  • Page 169: Accessories And Packing Materials

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B 20.1.6. Accessories and Packing Materials...

  • Page 170: Replacement Parts List

    All resistors are in ohms (Ω) K=1000Ω, M=1000kΩ Ref. Part No. Part Name & Description Remarks All capacitors are in MICRO FARADS (µF) P=µµF *Type & Wattage of Resistor PFGT2998Z-M NAME PLATE (for KX-FT932RU-B) PFGT3126Z-M NAME PLATE (for KX-FT932CA-B) PFGT3000Z-M NAME PLATE (for KX-FT932UA-B) PFKV1135Z2 COVER PFKM1173Z2...

  • Page 171: Digital Board Parts

    PFQX2443Z INSTRUCTION BOOK (for PQLB1E1 INSULATOR, FERRITE CORE FT932/934UA-B) J0KE00000101 FILTER PQHR945Z BAND PFZE1468Z-M GIFT BOX (for KX-FT932RU-B) PFDE1253Y LEVER, JAM SENSOR PFZE1470Z-M GIFT BOX (for KX-FT932UA-W) PFJS09P92X CONNECTOR, 9 PIN PFZE1531Z-M GIFT BOX (for KX-FT932CA-B) PFDR1072Y ROLLER, SEPARATION PFZE1518Z-M...
  • Page 172 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks IC10 C0JBAS000252 C122 ECJ1VB1H822K 0.0082 IC11 C0JBAA000393 C123 ECJ1VB1H822K 0.0082 IC12 C1BB00000129 C124 ECJ1VB1C104K C125 ECJ1VB1C104K IC15 C0CBADD00009 C127 ECJ1VC1H101J 100P C128 ECJ1VB1C104K...
  • Page 173 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks CN10 K1MN08A00017 CONNECTOR ERJ3GEYJ100 CN206 K1KA10A00412 CONNECTOR R100 ERJ3GEYJ103 R101 ERJ3GEYJ103 R102 ERJ3GEYJ103 (FUSES) R110 ERJ3GEYJ222 2.2K K5H122200005 FUSE R111 ERJ3GEYJ473 K5H251200003 FUSE...

  • Page 174: Analog Board Parts

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R231 ERJ3GEY0R00 R232 ERJ3GEYJ472 4.7K (PHOTO ELECTRIC TRANSDUCERS) R233 ERJ3GEYJ332 3.3K B3PAA0000330 PHOTO ELECTRIC TRANSDUCER PQVIPS2532-1 PHOTO ELECTRIC TRANSDUCER (COMPONENTS PARTS) 0N3131SKU PHOTO ELECTRIC TRANSDUCER...

  • Page 175: Operation Board Parts

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks ERJ3GEYJ123 ECJ1VF1E104Z ERJ3GEYJ123 ECEA1CKA100 ERJ3GEYJ473 ECEA1CKA221 ERJ3GEYJ220 ECJ1VC1H030C ERDS2TJ220 ECEA1VKA330 ERJ3GEYJ152 1.5K F1J1H104A578 ERJ3GEYJ152 1.5K 20.6. Operation Board Parts ERJ3GEYJ331 ERJ3GEY0R00 ERJ3GEYJ103 ERJ3GEYJ105 Ref.

  • Page 176: Power Supply Board Parts

    KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks ERJ3GEYJ271 (VARIABLE RESISTOR) ERJ3GEYJ4R7 VR201 ECNCYAA03B53 VARIABLE RESISTOR ERJ3GEYJ101 ERJ3GEYJ101 (VARISTOR) ERJ3GEYJ472 4.7K ZNR101 ERZV10D751 VARISTOR ERJ3GEYJ472 4.7K ERJ3GEYJ102 (RESISTORS) ERJ3GEYJ821 JP204 ERJ3GEY0R00...
  • Page 177 KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B KXFT932RUB KXFT938CAB KXFT932UAB KXFT934RUB KXFT934CAB KXFT934UAB...

This manual is also suitable for:

Kx-ft932ua-bKx-ft932ca-bKx-ft934ca-bKx-ft934ua-bKx-ft934ru-b

Table of Contents