Color - Varytec TouchWash User Manual

Slav – Setting of Master/Slave-mode
1. Push the Enter MENU-Button, then the UP/DOWN-button until you can read "SLav" in the
display. Confirm with ENTER.
2. The display shows "Sla", now the device is controlled by the master device.
Info – Shows the current software version
1. Push the Enter MENU-Button, then the UP/DOWN-button until you can read "Info" in the
display. Confirm with ENTER.
2. The display shoes the current software version.
Pasd – aktivate or deaktivate the display buttons
1. Tap the MENU button until"Pasd" is displayed. Press the ENTER button to choose ON or
OFF
2. Deaktivate the display buttons.
Tap any button til
Now tap „MENU", „UP", „DOWN" ,"ENTER" to get into the main menu.
is displayed.
7 / 9