Color - Varytec TouchWash User Manual

Addr – Setting for the start of the DMX address
1. Push the Enter MENU-Button, then the UP/DOWN-button until you can read "Addr" in the
display. Confirm with ENTER.
2. The display shows "Axxx". "x" is the current address. Set with the UP/DOWN-buttons the
right address and confirm with ENTER.
Chnd – Setting of the DMX mode
1. Push the Enter MENU-Button, then the UP/DOWN-button until you can read "Chnd" in the
display. Confirm with ENTER.
2. The display shows "x Ch". "x" is the current mode. Set with the UP/DOWN-buttons the
right mode and confirm with ENTER.
Auto – Setting of automatic mode
1. Push the Enter MENU-Button, then the UP/DOWN-button until you can read "Auto" in the
display. Confirm with ENTER.
2. The display shows "Autx". "x" is the current mode. Set with the UP/DOWN-buttons the
right mode and confirm with ENTER.
3. The display shows "SPx". With point of menu you can set the speed of the program. Set
the speed with the UP/DOWN-buttons confirm with ENTER.
Colo – Preprogrammed color blends
1. Push the Enter MENU-Button, then the UP/DOWN-button until you can read "Colo" in the
display. Confirm with ENTER.
2. The display shows "Coxx". "x" is one of 51 preprogrammed color blends. Set with the
UP/DOWN-buttons the right color blend and confirm with ENTER.
Stat – Manual setting colors/flash
1. Push the Enter MENU-Button, then the UP/DOWN-button until you can read "Stat" in the
display. Confirm with ENTER.
2. You can choose between 5 options. Choose the option you want and confirm with ENTER.
Set the right value and confirm with ENTER.
1) Red 000-255
2) Green 000-255
3) Blue 000-255
4) White 000-255
5) Strob 00-30
6 / 9