Table of Contents
Advertisement
Table 2-5 User Option Menu Commands
NOTE
Battery Packs
NOTE
Mobile Handset 110 Wireless Telephone and Desktop Charger User Guide - Revision 1
Commands
Ring Type
Noise Mode
Current IP address
Extension
Additional options may be present. Contact your system administrator for
information.
The Wireless Telephone's Battery Pack must be recharged periodically.
The Nickel Metal Hydride (NiMH) rechargeable Wireless Telephone
Battery Pack gives you four hours of talk time or 80 hours of stand-by
time.
Stand-by time is when the phone is turned on, but not in an active call.
Using the MH 110 Wireless Telephone
Descriptions
Select Telephone Ring to set
the standard ring on the
Wireless Telephone.
• Normal: is the factory default
ring.
• Vib/Norm ring: vibrates for
five seconds and then rings.
• Vibrate ring: vibrates for a
non-audible call alert.
Adjusts the Wireless
Telephone to account for
background noise.
• Normal: for most office
environments
• High: for moderate
background noise
• Severe: for extremely noisy
conditions.
In IP systems, the IP address
of the Wireless Telephone is
displayed. This number may
not be edited.
Sets the extension number
associated with your Wireless
Telephone. This number is
used to identify the Wireless
Telephone and is for display
purposes only.
2-9
Actions
Press 0 to select desired ring
type. The ring type currently set
displays with an asterisk.
Select an option that describes
the noise in your environment.
None.
Use keypad to enter extension
number.
Advertisement
Table of Contents
