Bang & Olufsen BeoSound 9000 Manual page 5

Buttons on the operation panel
The buttons on the operation panel are
conveniently grouped according to type of
function, so you can easily fi nd your way
around the panel while operating the system.
TREBLE RESET
BASS MUTE
OK
BALANCE VOL
LOUDNESS VOL
Sound adjustments. The
buttons give access to sound
adjustment functions:
VOL r and VOL u: Raise and
lower the volume level.
MUTE: Mutes or activates the
loudspeakers.
TREBLE, BASS, BALANCE and
LOUDNESS: Regulate the
sound from the loudspeakers.
RESET: Resets the settings for
sound to their default
settings.
What's on the display
The display keeps you informed about what
the BeoSound 9000 is doing and about
ongoing operations, e.g. playing a CD
sequence named GLENN MILLER. For details
in the operation of the display, see Switching
between displays in the Reference book.
TIMER ON/OFF
CHECK
OK
CLOCK CLEAR
Timer functions. The buttons
give access to timer functions:
TIMER: Sets Timers for when
the BeoSound 9000 should
begin to play or switch off.
ON/OFF: On or off decides
where a timer will be heard or
executed.
CHECK: Checks your Timers.
CLEAR: Clears your Timers.
CLOCK: Sets or displays the
built-in clock.
RANDOM CD
EDIT PAUSE
OK
SELECT EDITING
NAMING CLEAR
CD functions. The buttons give
access to the CD functions:
CD: Plays the CD.
PAUSE: Pauses playback.
SELECT and EDITING:
Program ming sequences of
discs and tracks.
RANDOM and EDIT: Operate
special random and edited
play functions for the CDs.
NAMING: Names discs and
sequences.
CLEAR: Clears programmed
values.
If PIN appears in the display the fi rst time you
activate a function, and you have not
received a PIN-code from your Bang &
Olufsen retailer, contact your retailer to
receive a PIN-code. For further information
about the PIN-code function, refer to the
chapter The PIN-code system on page 36 in
the Reference book.
A. AUX function. The button enables you to
switch on extra audio equipment.
Stand-by function. The button switches
BeoSound 9000 to stand by.
TUNE RADIO
AM/FM
OK
P. NO.
NAMING CLEAR
Radio functions. The buttons give access to
the radio functions:
RADIO: Plays the radio.
TUNE, AM/FM and P. NO.: Tune in to stations
and number them.
NAMING: Names stations.
CLEAR: Clears stations.
5
A. AUX