Using The Cd Player - Bang & Olufsen BeoSound 9000 Manual

6
When you have loaded your
BeoSound 9000 with 1–6 CDs, you
are ready to start playing your CDs.
When you press the CD button to
start playing, all information about
the CDs will be registered, e.g. the
number of tracks. All loaded CDs are
then played.
You can change between the different
CDs and the individual tracks, to
achieve the sequence of tracks you
prefer. You can also play CDs and
tracks on individual CDs in a random
order, using the random function.
After 12 hours of uninterrupted
playing, the BeoSound 9000 stops.
If you choose to listen to another
source, the CD player switches off
automatically.

Using the CD player

Loading CDs
Pressing the load button raises the glass door.
You can load the CDs you want to play or
remove the CDs from their compartments.
Press to raise the glass
door
Press to lower the glass
door, or...
CD ...press to lower the
door and start playing
If the carriage is situated over the CD
compart ment where you want to load a new CD,
simply press the direct selection button in front of
another CD compartment to make the carriage
move. The CD must be loaded with the text side facing
you. Hold the CD by its edges and insert the CD
(top section). To unload the CD, hold it by its
edges and push the CD slightly forward to
release it.