INC
VMA43007-R.3780.A
LED PCB
・ Mount the LED PCB (#134) in the direction of the arrow.
・ Tighten the screw (#210) from the opposite direction.
・ Place the wires ([Gray] and [White]) among the guides (as shown the below left picture).
・ Hook the other side of the wires (to direct as shown in the below right picture).
#210
#134
Lens unit
Caution: Be careful NEITHER to touch the whole area of the back (see below left picture) because there
is the CCD stage on it, NOR to touch the extension area of the lens (see below right picture).
- A ・ L100 -