Nikon coolpix L100 Repair Manual page 56

7-3. Shading central calibration
Caution: Set the luminance of the color viewer to "LV13" or equivalent.
・ Turn the camera ON.
・ At TELE-end zoom position, connect the camera and PC through USB cable.
・ At TELE-end zoom position, place the camera (front surface of lens) to the closest to the color viewer.
・ Connect the camera and PC through USB cable.
・ Place the camera to face the center of the color viewer in a regular position.
・ Start the SSIS calibration software.
・ Select "02.Shading Central Calibration", and click "Exe".
・ After the adjustment is completed, the result will appear.
・ If the result is in the range of the below standard values, "Result" shows "OK",
・ If "Result" shows "NG", make readjustment.
・ Turn the camera OFF.
Camera
Set to "Tele-end".
Changed Page
△× 3
Color viewer (J63070)
Result of adjustment
- A32 ･ L100 -
△(Revision)
△(Revision)
Shading central calibration standard
X_CENT_POS "-325" - "-45"
Y_CENT_POS "-64" - "-246"
Result 0x0000
MS=MS1, MS2
MS_Z=MS3, MS4
MS_Z2=MS1, MS2
MS1-6 3950 - 5350
AGC AS1, AS2, AS3, AS4, AS5, AS6, AS7
AS1-7 Less than 1023
INC
VMA43007-R.3780.A
△(Deletion)
March.6.2009