If the mains cord or the supply hose is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
Calc-Clean rinsing cap. If steam continues to escape when the appliance heats up, switch off the appliance and contact a service centre authorised by Philips. Never remove the Calc-Clean rinsing cap when the steam tank is hot.
GC7430: The high steam setting light flashes to indicate that the steam tank is heating up. After approx. 2 minutes, the steam setting light stays on continuously, to indicate that the water in the steam tank is hot enough for steam ironing.
Note: Some water droplets may appear when you use the steam boost function for the first time. The water droplets disappear after you have used the steam boost function for some time. ‘Water tank empty’ light (GC7430 only) When the water in the water tank runs low during use, the ‘water tank empty’ light goes on (Fig.
(Fig. 21). Guarantee and service If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer.
Need help?
Do you have a question about the GC7430 and is the answer not in the manual?
Questions and answers