MTU 12 V 4000 M73 x Operating Instructions Manual page 170

2. Tighten screws (1) to specified torque using a torque wrench.
Name
Screw
3. Install coolant vent line on compressor housing.
4. Install intake housing (3) with actuating cyl-
inder (2).
5. Position clamp (1) and tighten to specified torque using a torque wrench.
Name
Clamp
6. Install oil lines (2). Tighten threaded adapter at actuating cylinder to specified torque using a torque
wrench.
Name
Threaded adapter
7. Install charge-air pipework (1) from exhaust turbocharger to intercooler.
8. Install air filter (→ Page 173).
9. Fill with engine coolant (→ Page 194).
170 | Task Description | MS150045/02E 2013-07
Size Type
M10x18 Tightening torque
Size Type
Tightening torque
Size Type
10 G 1/4 Tightening torque
A
Lubricant Value/Standard
(Engine oil) 20 Nm + 2.5 Nm
Lubricant Value/Standard
15 Nm + 2 Nm
Lubricant Value/Standard
(Engine oil) 40 Nm +4 Nm