Humminbird ONIX8 Installation Manual page 29

Set Vessel Dimensions
It is important to set the height, width, and depth allowances required for
your vessel as that information affects the accuracy of auto route
calculations during navigation.
1. Select Vessel Dimensions and open the submenu.
2. Select a setting. Drag the slider, or use the Rotary Dial, to adjust the
setting.
3. Select additional settings as needed.
4. Tap the back arrow on-screen or press the EXIT key
to the main menu.
5. Select Confirm to confirm the selected settings.
The unit will automatically enter normal operation.
to return
25 Setup Guide