Press the hair length setting selector and then
3
move it from left to right or right to left to
select a setting (Fig. 9).
-
The line above the hair length setting
selector shows which setting you have
selected (Fig. 10).
Press the trimming head on/off button once
4
to switch on the trimming head. (Fig. 11)
QS6160 only: The on/off button lights up to
,
indicate that the trimming head is operating.
To trim the hair, move the trimming
5
comb through the hair slowly (Fig. 12).
Tips
-
Always make sure that the tip of the trimming
comb points in the direction in which
you move the appliance.
-
Make sure that the flat part of the trimming
comb is always in full contact with the skin to
obtain an even hair length result.
-
Since hair grows in different directions, you
need to move the appliance in different
directions as well (upward, downward or
across).
English